采用不完全相变内耗(IF)测量法, 在Cu-Al-Ni-Mn-Ti合金马氏体相变中获得双内耗峰, 即低温内耗峰和高温内耗峰. 高温内耗峰主要出现在频率小于0.050 Hz的范围, 其位置对应于相对动力学模量的拐点位置; 高温内耗峰峰值在测量频率范围内与振动频率成反比关系, 满足经典的Belko和Delorme模型; 高温内耗峰具有明显的反常应变振幅效应, 其峰值随变温速率的增大而增大, 这些都说明高温内耗峰的形成与相转变量有关.
Two internal friction (IF) peaks, the low-temperature IF peak and the high-temperature IF peak, were obtained in martensitic transformation of Cu-Al-Ni-Mn-Ti alloy through partial phase transition method. The high-temperature IF peak primarily appeared where the frequency was less than 0.050 Hz and it corresponded to the inflexion point of relative dynamic modulus. The maximum of the high-temperature IF peak was inversely proportional to the frequency within the measuring frequencies, which was in accordance with the classical models of Belko and Delorme. The high temperature peak had a clear abnormal effect on strain amplitude, and its maximum increased with the increase of heating rate, which all suggested that it corresponded to the value of phase transformation.
参考文献
| [1] | 徐祖耀.马氏体相变与马氏体[M].北京:科学出版社,1999:1. |
| [2] | Kuska R .The application of Landau′s theory for studying first-order phase transition by the internal friction method[J].Physical Status Solidi A Applied Research,1985,88:151. |
| [3] | Huang Y N;Wang Y N;Shen H M .Internal friction and dielectric loss related to domain walls[J].Physical Review B,1992,46:3290. |
| [4] | Zhang J X;Fung P C W;Zeng W G .Dissipation function of the first-order phase transformation in solids via internal-friction measurements[J].Physical Review B,1995,52:268. |
| [5] | 谭冀,李艳锋,高宝东,米绪军.热机械循环对Ti49.8Ni50.2形状记忆合金相变行为的影响[J].稀有金属,2008(03):284-288. |
| [6] | Ratchev P;Van Humbeeck J;Delaey L .On the formation of 2H stacking sequence in 18R martensite plates in a precipitate containing Cu-Al-Ni-Ti-Mn alloy[J].ACTA METALLURGICA ET MATERIALIA,1993,41:2441. |
| [7] | Balandraud, X;Zanzotto, G .Stressed microstructures in thermally induced M9R-M18R martensites[J].Journal of the Mechanics and Physics of Solids,2007(2):194-224. |
| [8] | Gong C L;Han F S .Anomalous internal friction associated with the thermoelastic martensitic transformation in a Cu-Al-Ni-Mn-Ti alloy[J].Scripta Materialia,2007,57:181. |
| [9] | Gong CL;Han FS;Li Z;Wang MP .Internal friction peak associated with the interface motion in the martensitic transformation of CuAlNiMnTi shape memory alloy[J].Journal of Applied Physics,2007(2):23521-1-23521-9-0. |
| [10] | Delorme J F;Villeurbanne I N S A;Gobin P F .Internal friction and microdeformation associated with martensitic transformation of metallic Solids-1[J].Met Corr Ind,1973,48:185. |
| [11] | Belko V N;Darinsky B M;Postnikov V S;Sharshakov I M .Internal friction during diffusionless phase transformations in Co-Ni alloys[J].Physics of Metals and Metallography,1969,27:141. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%