介绍了化学气相沉积(CVD)技术制备难熔金属钽涂层的原理及方法.利用TaCl5-H2-HCl反应体系,以冷壁式化学气相沉积法在钼基体表面沉积了钽涂层.利用扫描电子显微镜(SEM)、X射线物相分析仪(XRD)、显微硬度计等分析手段,研究了反应气体(氢气、氯气)的流量变化对钽涂层的沉积速率、结构、表面形貌、硬度及密度等的影响;应用Harris公式,计算了钽涂层的织构系数,获得了钽涂层的择优取向.研究结果表明:随着氢气流量的增加,涂层沉积速率加快,随着氯气流量的增加,涂层的沉积速率则是先增加后减小;涂层由体心立方结构的钽(α-Ta)构成,表面形貌呈类金字塔形结构,涂层(200)晶面方向为最快生长方向;反应气体流量变化对涂层硬度及密度的影响均不明显;涂层维氏硬度在HV 130.94 ~HV 152.43之间,涂层致密性好,相对密度都在99.65%以上.
参考文献
[1] | S. M. CARDONNE;P. KUMAR;C. A. MICHALUK .Tantalum and its Alloys[J].International Journal of Refractory Metals & Hard Materials,1995(4):187-194. |
[2] | R. W. Buckman Jr. .New applications for tantalum and tantalum alloys[J].JOM,2000(3):40-41. |
[3] | 吴全兴.钽及其合金的用途[J].稀有金属快报,2002(3):23-24. |
[4] | Taxil P.;Savall A. .Tantalum Protective Thin Coating Techniques for the Chemical Process Industry: Molten Salts Electrocoating as a New Alternative[J].International Journal of Refractory Metals & Hard Materials,1996(5/6):365-381. |
[5] | J.-P.Delplanque;W.D.Cal;R.H.Rangel .Spray atomization and deposition of tantalum alloys[J].Acta materialia,1997(12):5233-5243. |
[6] | Wolf H.;Schulz SE.;Gessner T.;Streiter R. .GROWTH RATE MODELING FOR SELECTIVE TUNGSTEN LPCVD[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,1995(1/4):332-338. |
[7] | 蔡宏中,魏巧灵,魏燕,陈力,郑旭,胡昌义.CVD温度对钽沉积层性能的影响[J].稀有金属材料与工程,2012(11):2037-2040. |
[8] | Korotkov RY;Ricou P;Farran AJE .Preferred orientations in polycrystalline SnO2 films grown by atmospheric pressure chemical vapor deposition[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2006(1/2):79-87. |
[9] | Dollet A.;Casaux Y.;Matecki M.;Rodriguez-Clemente R. .Chemical vapour deposition of polycrystalline AlN films from AlCl3-NH3 mixtures: II - surface morphology and mechanisms of preferential orientation at low-pressure[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2002(1/2):118-131. |
[10] | 蔡宏中,魏巧灵,陈力,王云,胡昌义.CVD温度对钽涂层组成、显微组织及形貌的影响[J].稀有金属,2012(04):563-567. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%