以精制菜籽油为原料,天然丝光沸石为催化剂,研究了硫化菜籽油的催化合成,并借助FTIR测试技术分析了产物的化学结构. 通过四球摩擦磨损试验机考察了其摩擦学性能,同时对磨痕表面进行了XPS及显微分析,探讨了其润滑机理. 结果表明,随硫粉投料量的增大,菜籽油不饱和度逐渐降低,在丝光沸石催化下,硫化反应收率可达98%以上;含硫量从0增大到9.96%,硫化菜籽油的摩擦学性能明显提升,摩擦系数由0.085降为0.025,磨斑直径由0.56 mm降至0.42 mm,最大无卡咬负荷(PB值)由549 N升至745 N,烧结负荷(PD值)由1 960 N升至2 254 N;其润滑机理初步归结于硫化菜籽油在摩擦副表面上形成的吸附油膜,以及摩擦过程中由于摩擦化学反应形成的摩擦转移膜共同起减摩耐磨和极压作用.
参考文献
| [1] | Fox N J,Stachowia G W.Tribol Inter[J],2007,40(7):1 035 |
| [2] | CHEN Chun-Huai(陈春怀),ZHOU Jing-En(周敬恩).Chinese J Mecha Eng(机械工程学报)[J],2002,38(10):118 |
| [3] | Bisht R P S,Bhatia V K.J Synth Lubr[J],1997,14(1):23 |
| [4] | FANG Jian-Hua(方建华),CHEN Bo-Shui(陈波水),DONG Ling(董凌),WANG Jiu(王九).Tribology(摩擦学学报)[J],2005,25(5):408 |
| [5] | XUE Bin(薛斌),LI Lan-Dong(李兰冬),ZHANG Fu-Xiang(章福祥),GUAN Nai-Jia(关乃佳).Chinese J Inorg Chem(无机化学学报)[J],2006,22(12):2 197 |
| [6] | LIU Bai-Jun(刘百军),ZENG Xian-Jun(曾贤君),WANG Hui(王辉),HUANG Yong(黄永),WANG Mei(汪梅).Acta Phys Chim Sin(物理化学学报)[J],2007,23(4):503 |
| [7] | ZHANG Rong(张蓉),JIN Yu(靳煜),PENG Qin-Ji(彭勤纪),ZHANG Hua(张华).Chinese J Appl Chem(应用化学)[J],2002,19(4):373 |
| [8] | CHEN Jie(陈洁),SONG Qi-Ze(宋启泽).Spectrum Analysis of Organic Compound(有机波谱分析)[M].Beijing(北京):Press of Beijing University of Technology(北京理工大学出版社),1996:221 |
| [9] | GUO Zhi-Guang(郭志光),LIU Wei-Min(刘维民).Tribology(摩擦学学报)[J],2006,26(2):97 |
| [10] | QIAN Jian-Hua(钱建华),LIU Lin(刘琳),WANG Dao-Lin(王道林),XING Jin-Juan(邢锦娟).J Petrochem Univ(石油化工高等学校学报)[J],2006,19(4):5 |
| [11] | Cosmina P,Geza B,Dorina M.J Synth Lubr[J],2006,23:185 |
| [12] | Wang B,Tao D H.J Shanghai Univ(English Edition)[J],2005,9(5):462 |
| [13] | FANG Jian-Hua(方建华),CHEN Bo-Shui(陈波水),DONG Ling(董凌),WANG Jiu(王九),LI Xiao-Dong(李晓东).Acta Petrolei Sinica(石油学报)[J],2004,20(4):93 |
| [14] | YE Bin(叶斌),TAO De-Hua(陶德华).Lubr Engi(润滑与密封)[J],2006,176(4):176 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%