欢迎登录材料期刊网

材料期刊网

高级检索

利用球与平面的赫兹接触应力分布的经验修正公式[1 ],对磁控溅处理前的基体表面粗糙度对沉积层和基体的界面结合力进行了研究,并和其 他涂层界面结合力的测量方法进行了比较。结果表明:基体表面粗糙度对界面结合力有很大 影响,表面粗糙度的改善有利于TiN层/基体的界面结合力的提高,同时改善了TiN层的摩擦 学性能。

The boundary adhesion strength of magnetic sput tered TiN coatings on GCr15 steel substrates with different surface roughness w as studied employing the revised Hertz contact stress formulas based on ball/pl ane[1]. The measured and calculated data were compared with those got by other methods. The results showed that the surface roughness of substrate influenced greatly the adhesion of TiN coating deposited by magnetic sputtering deposition process. Improving the surface roughness of substrate is beneficial to increasing the adhesion of TiN coating, and then to improving its tribologic al property. This study is important in advising the practical application of T iN coating.

参考文献

[1] 韦习成,李健.超硬薄膜表面粗糙度对摩擦学性能的影响[C].’94秋季中国材料研讨会Ⅲ新型材料及表面技术,1994:431~436.
[2] 韦习成.磁控溅射TiN界面结合强度的压痕法测试研究[A].,1999:103-107.
[3] 贾俊辉 等.表面膜附着力的压痕法测定[J].机械工程材料,1988,12(06):31-33.
[4] 王力衡.薄膜技术[M].北京:清华大学出版社,1991:131-135.
[5] Weiss H .Adhesion of advanced overlay coatings:mechanisms and quantitative assessment[J].Surface and Coatings Technology,1995,71:201-207.
[6] Valli J .Areview of adhesion test methods for thin hard coati ngs[J].Journal of Vacuum Science and Technology,1986,A4(06):3007-3014.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%