累积轧合法是一种深度塑性变形方法,它是通过累积的轧制过程达到金属材料发生强烈塑性变形的目的,可以显著细化金属材料的晶粒尺寸,对材料的微观组织和性能都产生很大的影响.对累积轧合法的工艺作了介绍,并对其目前的研究现状和存在问题作了分析.
参考文献
| [1] | 毕见强,孙康宁,王素梅,周慧,刘蕊.大塑性变形法制备块体纳米材料[J].金属成形工艺,2002(06):43-45. |
| [2] | 魏伟,陈光.大塑性变形制备块体纳米材料[J].机械工程学报,2002(07):1-5. |
| [3] | 魏伟,陈光.大塑性变形制备纳米结构金属[J].稀有金属,2003(03):361-365. |
| [4] | 赵新奇,张俊宝,徐政,宋洪伟.累积叠轧焊制备超细晶IF钢微观组织与力学性能[J].上海有色金属,2002(03):107-110. |
| [5] | N. Tsuji;R. Ueji;Y. Minamino .Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process[J].Scripta materialia,2002(2):69-76. |
| [6] | N.Tsuji;Y.Saito;H.Utsunomiya;S.Tanigawa .ULTRA-FINE GRAINED BULK STEEL PRODUCED BY ACCUMULATIVE ROLL-BONDING(ARB)PROCESS[J].Scripta materialia,1999(7):795-800. |
| [7] | Tsuji N;Ito Y;Saito Y et al.Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing[J].Scripta Materialia,2002,47(12):893-899. |
| [8] | Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H. .Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,1999(2):579-583. |
| [9] | Huang X.;Tsuji N.;Hansen N.;Minamino Y. .Microstructural evolution during accumulative roll-bonding of commercial purity aluminum[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):265-271. |
| [10] | Y. Saito;N. Tsuji;H. Utsunomiya;T. Sakai;R. G. Hong .Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process[J].Scripta materialia,1998(9):1221-1227. |
| [11] | S. H. Lee;Y. Saito;N. Tsuji .Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process[J].Scripta materialia,2002(4):281-285. |
| [12] | Lee SH.;Saito Y.;Sakai T.;Utsunomiya H. .Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):228-235. |
| [13] | Xing Z P;Kang S B;Kim H W .Softening behavior of 8011alloy produced by accumulative roll bonding process[J].Scripta Materialia,2001,45(05):597-604. |
| [14] | Seong-Hee Lee;Tetsuo Sakai;Yoshihiro Saito;Hiroshi Utsunomiya;Nobuhiro Tsuji .Strengthening of sheath-rolled aluminum based MMC by the ARB process[J].Materials transactions,1999(12):1422-1428. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%