采用成形极限图(FLD)试验,运用网格应变自动测试分析系统ASAME,对Al-Mg-Si基合金车身板的成形极限进行了检测,同时,将FLD应用于有限元分析作为成形时出现破裂缺陷的判据,并分析车门外板在冲压成形过程中破裂危险部位主应变在FLD上分布.结果表明:Al-Mg-Si基合金板材的成形极限高于目前常用的AA6111铝合金车身板;拉延筋的形状和位置对成形过程的影响很大,采用双曲面法设计车门可以改善车门腹部拉深不充分引起的刚度问题.
参考文献
| [1] | 关绍康,姚波,王迎新.汽车铝合金车身板材的研究现状及发展趋势[J].机械工程材料,2001(05):12-14,18. |
| [2] | Miller W S;Zhang L;Bottema J et al.Recent development in aluminum alloys for the automotive industry[J].Materials Science and Engineering,2000,A280:37-49. |
| [3] | Keeler S P .Determination of forming limits in automotive stampings[J].Sheet Metal Industries,1965,42:683-691. |
| [4] | Goodwin G M .Application of strain analysis to sheet metal forming problems in the press shop[R].New York:Society of Automotive Engineers Technical Paper No.680093,1968. |
| [5] | Graf A;Hosford W .The influence of strain-path changes on forming limit diagrams of AA6111-T4[J].International Journal of Mechanical Sciences,1994,36:897-910. |
| [6] | Raghavan K S .A simple technique to generate in-plane forming limit curve and selected applications[J].Materials Transactions,1995,26A:2075-2084. |
| [7] | 万敏;胡运斌;谢英.飞机蒙皮铝合金板材成形极限及应用[J].中国有色金属学报,2002(12):180-183. |
| [8] | C. L. Chow;L. G. Yu;W. H. Tai;M. Y. Demeri .Prediction of forming limit diagrams for AL6111-T4 under non-proportional loading[J].International Journal of Mechanical Sciences,2001(2):471-486. |
| [9] | 杨曦 .板料成形工艺参数影响的数值模拟研究及主要成形缺陷的计算机仿真[D].上海交通大学,2001. |
| [10] | Dynaform-PC Application Manual[M].Engineering Technology Associates,Inc,1999 |
| [11] | 王新华;袁联富.冲模结构图册[M].北京:机械工业出版社,2003 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%