针对目前颗粒增强铝基复合材料在焊接方面存在的一些技术问题,简要介绍了国内外几种适用于铝基复合材料焊接的新技术,主要有非真空扩散焊接、非夹层液相扩散焊接、等离子喷涂焊接、激光诱发反应焊接、刷镀镍涂层激光焊接、搅拌摩擦焊和电容储能放电焊接等.
参考文献
| [1] | 桂满昌;王殿斌;张洪 .颗粒增强铝基复合材料在汽车上的应用[J].机械工程材料,1996,20(05):30-33. |
| [2] | 张国定;赵昌正.金属基复合材料[M].上海:上海交通大学出版社,1996 |
| [3] | Ahearn J S;Cooke C;Fishman S G .Fusion welding of SiCreinforced Al composites[J].Metal Construction,1982,14(04):192-197. |
| [4] | Herbert Staufer.Problems by welding aluminium matrix composites[A].Hanover,Germany,1998:259-264. |
| [5] | Hill J F;Wilkinson S W;Fenn R .Fusion welding of an aluminium matrix/SiC reinforced MMC[J].International Journal for the Joining of Materials,1997,9(02):61-65. |
| [6] | Dahotre N B;McCay T D;McCay M H .Laser processing of a SiC/Al-alloy metal matrix composite[J].Journal of Applied Physics,1989,65(12):5072-5077. |
| [7] | A. Urena;M. D. Escalera;L. Gil .Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminium matrix composites[J].Composites science and technology,2000(4):613-622. |
| [8] | 刘黎明,徐卫平,杨德君,吴林,牛济泰.铝基复合材料扩散焊接接合区微连接行为[J].焊接学报,2001(01):15-18. |
| [9] | C. S. Lee;H. Li;R. S. Chandel .Vacuum-free diffusion bonding of aluminium metal matrix composite[J].Journal of Materials Processing Technology,1999(0):326-330. |
| [10] | C. S. Lee;H. Li;R. S. Chandel .Stimulation model for the vacuum-free diffusion bonding of aluminium metal-matrix composite[J].Journal of Materials Processing Technology,1999(0):344-349. |
| [11] | 刘黎明,牛济泰,姜传海,丁相利.采用非夹层液相扩散焊连接铝基复合材料[J].焊接,1999(05):12. |
| [12] | W.Guo,J.T.Niu,J.F.Zhai,G.T.Zhou,M.Z.Wang.THE INTERFACIAL BEHAVIORS OF ALUMINUM MATRIX COMPOSITE IN DIFFERENT WELDING METHODS[J].金属学报(英文版),2004(01):55-60. |
| [13] | 高静微.金属基复合材料连接技术的研究进展[J].稀有金属,1999(01):28-34. |
| [14] | T. ITSUKAICHI;T. W. EAGAR;M. UMEMOTO;I. OKANE .Plasma Spray Joining of Al-Matrix Particulate Reinforced Composites[J].Welding Journal,1996(9):285s-296s. |
| [15] | G. Cam;M. Kocak .Progress in joining of advanced materials[J].International Materials Reviews,1998(1):1-44. |
| [16] | 陈永来,于利根,王华明.SiCp/6061AI金属基复合材料焊缝"原位”合金化激光焊接研究[J].中国激光,2001(01):85-88. |
| [17] | 陈永来,于利根,王华明.合金化填充材料Ni对SiCP/6061Al复合材料激光焊接焊缝显微组织的影响[J].复合材料学报,2000(04):63. |
| [18] | 徐九华,范炯,林祥丰.金属基复合材料激光诱发反应焊接研究[J].航空学报,1999(06):573. |
| [19] | H. M. Wang;Y. L. Chen;L. G. Yu .'In-situ' weld-alloying/laser beam welding of SiCp/6061Al MMC[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):1-6. |
| [20] | Du J H;Yue T M;Man H C.Electro-plating of aluminiumbased composites for eliminating carbides formation in laser welding[A].,1997:783-792. |
| [21] | 江辉.先进的焊接技术--摩擦搅拌焊[J].宇航材料工艺,1998(06):22-26. |
| [22] | John A. Wert .Microstructures of friction stir weld joints between an aluminium-base metal matrix composite and a monolithic aluminium alloy[J].Scripta materialia,2003(6):607-612. |
| [23] | G.J. Fernandez;L.E. Murr .Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359+20 percent SiC metal-matrix composite[J].Materials Characterization,2004(1):65-75. |
| [24] | R.A. Prado;L.E. Murr;D.J. Shindo .Tool wear in the friction-stir welding of aluminum alloy 6061+20 percent Al_2O_3: a preliminary study[J].Scripta materialia,2001(1):75-80. |
| [25] | Devletian J H .SiC/Al metal matrix composite welding by a capacitor discharge process[J].Welding Journal,1987,66(06):33-39. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%