采用累积叠轧焊工艺制备了超细晶组织不锈钢薄板,并对其微观结构、力学性能及断裂方式进行了分析.结果表明:累积叠轧后材料中晶粒呈扁平状,抗拉强度显著提高,经过两道叠轧后抗拉强度可达1 060 MPa;拉伸断口有一定的颈缩现象,整个断面呈韧窝状,为韧性断裂.
参考文献
| [1] | Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H. .Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,1999(2):579-583. |
| [2] | Y. Saito;N. Tsuji;H. Utsunomiya;T. Sakai;R. G. Hong .Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process[J].Scripta materialia,1998(9):1221-1227. |
| [3] | Lee S H;Saito Y;Tsuji N H et al.Role of shear in ultragrain refinement by accumulative roll-bonding (ARB) process[J].Scripta Materialia,2002,46:281-285. |
| [4] | N. Tsuji;R. Ueji;Y. Minamino .Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process[J].Scripta materialia,2002(2):69-76. |
| [5] | 赵新奇,张俊宝,徐政,宋洪伟.累积叠轧焊制备超细晶IF钢微观组织与力学性能[J].上海有色金属,2002(03):107-110. |
| [6] | Stolyarov V V;Zhu Y T;Lowe T C et al.Microstructure and properties of pure Ti processed by ECAP and cold extrusion[J].Materials Science and Engineering,2001,A303:82-89. |
| [7] | Vladimir V. Stolyarov;Y. Theodore Zhu;Igor V. Alexandrov;Terry C. Lowe;Ruslan Z. Valiev .Influence of ECAP routes on the microstructure and properties of pure Ti[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):59-67. |
| [8] | A. A. Howe .Ultrafine grained steels: industrial prospects[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2000(11/12):1264-1266. |
| [9] | Lee SH.;Saito Y.;Sakai T.;Utsunomiya H. .Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):228-235. |
| [10] | Kamikawa N;Tsuji N;Minamino Y .Microstructure and texture through thickness of ultra-low carbon IF steel sheet severely deformation by accumulative roll-bonding[J].Science and Technology of Advanced Materials,2004,5:163-172. |
| [11] | 李亚江,王娟,尹衍升,马海军.Fe3Al/18-8不锈钢扩散焊界面附近的元素扩散[J].金属学报,2005(02):150-156. |
| [12] | 严慕容,陈美贞.退火对304不锈钢拉伸坯料力学性能的影响[J].农机化研究,2002(04):151-153. |
| [13] | 崔约贤;王长利.金属断口分析[M].哈尔滨:哈尔滨工业大学出版社,1998 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%