对喷射共沉积7090/SiCP复合材料坯经过挤压及不同热处理后棒材的微观组织和力学性能进行了研究,对其热处理工艺进行了确定.结果表明:复合材料坯经挤压后组织细小均匀,SiC颗粒均匀分布;采用470℃×1 h+490℃×1 h的双级固溶处理及120℃×28 h时效后,挤压棒材的抗拉强度可达785 MPa,弹性模量超过100GPa;双级固溶+时效复合材料的力学性能明显优于单级固溶+时效态的力学性能;复合材料的断裂主要是由SiC颗粒断裂和界面脱粘引起.
参考文献
[1] | 郝广瑞,王洪斌,黄进峰,杨滨,张永安,熊柏青,张济山.喷射成形超高强度Al-Zn-Mg-Cu合金的固溶处理[J].北京科技大学学报,2004(05):502-506. |
[2] | 陈振华,蒋向阳,杨伏良,周多三,黄培云.多层喷射沉积工艺[J].中国有色金属学报,1995(04):66-69. |
[3] | 陈振华,黄培云,蒋向阳,杨伏良,周多三.多层喷射沉积规律[J].中国有色金属学报,1995(04):70-72. |
[4] | Y.-H. Frank Su;Y.C. Chen;Chi Y.A. Tsao .Workability of spray-formed 7075 Al alloy reinforced with SiCp at elevated temperatures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):296-304. |
[5] | 陈绍康 .LCA合金低熔点共晶相组成及固溶变化[J].铝加工,1994,17(06):18-23. |
[6] | Ludtka G M;Laughlin D E .The influence of microstructure and strength on the fracture mode and toughness of 7xxx series aluminum alloys[J].Metallurgical and Materials Transactions,1982,13A(03):411-414. |
[7] | CHEN Kang-hua;HUANG Lan-ping .Strengthening-toughening of 7xxx series high strength aluminum alloys by heat treatment[J].Transactions of Nonferrous Metals Society of China,2003(3):484-490. |
[8] | 王洪斌,刘慧敏,黄进峰,张济山,张永安,熊柏青.热处理对喷射成形超高强Al-Zn-Mg-Cu系铝合金的影响[J].中国有色金属学报,2004(03):398-404. |
[9] | BRUCE MORERE;CLAIRE MAURICE;RAVI SHAHANI .The Influence of Al_3Zr Dispersoids on the Recrystallization of Hot-Deformed AA 7010 Alloys[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(3):625-632. |
[10] | S. H. WANG;J. Y. UAN;T. S. LUI .Examination on the Aging and Tensile Properties of Al-Zn-Mg/Al_3Ni Eutectic Composite[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2002(3):707-711. |
[11] | 袁武华 .喷射沉积轻量化材料的研制——高性能7075/SiC<,p>复合材料、8009合金板材的制备及应用研究[D].湖南大学,2005. |
[12] | Bhaduri A;Gopinathan V;Ramarkrishnan P et al.Processing and properties of SiC particulate reinforced Al-6.2Zn-2.5Mg-1.7Cu alloy (7010)matrix composites prepared by mechanical alloying[J].Materials Science and Engineering A,1996,221:94-101. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%