以纳米和微米级WC-12Co粉末为原料,采用超音速火焰喷涂(HVOF)方法在16Mn基体上制备了两种涂层.利用X射线衍射仪对喷涂粉末及涂层进行了相结构分析,用扫描电镜对喷涂粉末、磨粒磨损前后的涂层表面形貌进行了观察,探讨了粉末结构、涂层的组织和结构以及抗磨粒磨损的性能.结果表明:WC-12Co粉末结构对涂层的组织结构影响非常显著,微米WC-12Co粉末中的WC的分解基本上得到了抑止,而纳米结构的粉末由于出现了WC的部分分解,导致了纳米涂层的抗磨粒磨损性能相对于微米涂层提高不多,但是与基体16Mn相比,两种涂层均表现出优异的抗磨粒磨损性能.
参考文献
| [1] | 黄智文.谈谈磨粒磨损[J].表面技术,2000(04):34-36. |
| [2] | 王辉平,胡茂中.纳米技术与硬质合金[J].中国钨业,2001(02):30-32. |
| [3] | McCandlish L E .Production capability and powder processing of mo-structured tungsten carbide-cobalt[J].Metal Powder Report,1997,52(12):41-44. |
| [4] | Jia K;Fischer T E .Sliding wear of conventional and nanostructured cemented carbides[J].Wear,1997,203:310-318. |
| [5] | 张云乾,丁彰雄,范毅.HVOF喷涂纳米WC-12Co涂层的性能研究[J].中国表面工程,2005(06):25-29. |
| [6] | D.A.Stewart;P.H.Shipway .Microstructural evolution in thermally sprayed WC-Co coatings: comparison between nanocomposite and conventional starting powders[J].Acta materialia,2000(7):1593-1604. |
| [7] | 周克崧,宋进兵,刘敏,代明江,杨大君.热喷涂技术替代电镀硬铬的研究进展[J].材料保护,2002(12):1-4. |
| [8] | Qiao YF.;Fischer TE.;Dent A. .The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures[J].Surface & Coatings Technology,2003(1):24-41. |
| [9] | Voyer J.;Marple B.R. .Sliding wear behavior of high velocity oxy-fuel and high power plasma spray-processed tungsten carbide-based cermet coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,1999(1):135-145. |
| [10] | Celik E;Culha O;Uyulgan B;Azem NFA;Ozdemir I;Turk A .Assessment of microstructural and mechanical properties of HVOF sprayed WC-based cermet coatings for a roller cylinder[J].Surface & Coatings Technology,2006(14/15):4320-4328. |
| [11] | Wirojanupatump S.;McCartney DG.;Shipway PH. .The influence of HVOF powder feedstock characteristics on the abrasive wear behaviour of CrxCy-NiCr coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(9):829-837. |
| [12] | Ganesh Skandan;Ruvee Yao;Bernard H. Kear .MULTIMODAL POWDERS: A NEW CLASS OF FEEDSTOCK MATERIAL FOR THERMAL SPRAYING OF HARD COATINGS[J].Scripta materialia,2001(8-9):1699-1702. |
| [13] | Lima R S;Marple B R .From APS to HVOF spraying of conventional and nanostructured titania feedstock powders:a study on the enhancement of the mechanical properties[J].Surface and Coatings Technology,2005,A395:269-273. |
| [14] | Gel M l;Jordan E H;Sohn Y H.Enhanced ductility in thermally sprayed titania coating synthesized using a nanostructured feedstock[J].Materials Science and Engineering A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2005(1-2):269-274. |
| [15] | Luo H.;Goberman D.;Shaw L.;Gell M. .Indentation fracture behavior of plasma-sprayed nanostructured Al2O3-13wt.%TiO2 coatings[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):237-245. |
| [16] | Lima RS;Marple BR .From APS to HVOF spraying of conventional and nanostructured titania feedstock powders: a study on the enhancement of the mechanical properties[J].Surface & Coatings Technology,2006(11):3428-3437. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%