研究连接接头在动态冲击载荷作用下的响应规律,对于汽车和航空航天等产品的安全高效运行具有重要的意义.从试验研究与数值模拟两个方面综述了近年来国内外接头动态力学性能研究的现状,指出应变率、温度、结构等因素对接头动态力学性能具有显著影响;介绍了目前接头动态力学的试验技术以及接头动态失效判据的应用情况.
参考文献
| [1] | Lee WS;Lin CF;Liu CY;Tzeng FT .Impact properties of 304L stainless steel GTAW joints evaluated by high strain rate of compression tests[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2004(3):335-344. |
| [2] | 巩水利,张建勋,裴怡,于琴.焊接接头动态力学的应变率效应[J].西安交通大学学报,2000(11):82-85,94. |
| [3] | 巩水利;张建勋;裴怡 等.高应变率下焊接接头的动态性能测试技术[J].焊接学报,1999,20(12):86-92. |
| [4] | Vikas Srivastava;Arun Shukla;Venkitanarayanan Parameswaran .Experimental Evaluation of the Dynamic Shear Strength of Adhesive-Bonded Lap Joints[J].Journal of Testing and Evaluation: A Multidisciplinary Forum for Applied Sciences and Engineering,2000(6):438-442. |
| [5] | Bezemer A A;Guyt C B;Vlot A .New impact speci-men for adhesives:optimization of high-speed-loaded adhesive joints[J].International Journal of Adhesion and Adhesives,1998,18(04):255-260. |
| [6] | Birch R S;Alves M .Dynamic failure of structu-ral joint systems[J].Thin-Walled Structures,2000,36:137-154. |
| [7] | Mochizuki M;An G B;Ohmura T et al.Strength and fracture in the undermatched joint by dynamic loading-studies on characteristics of dynamic deformation and fracture in welded joint with strength heterogeneity[J].Quarterly Journal of the Japan Welding Society,2001,19(03):547-555. |
| [8] | 巩水利,张建勋.焊接接头高应变率下的动态断裂韧度分析[J].焊接学报,2002(04):53-56. |
| [9] | B.S. Shul'ginov;V.V. Matveyev .Impact fatigue of low-alloy steels and their welded joints at low temperature[J].International Journal of Fatigue,1997(8/9):621-627. |
| [10] | Prashant Kumar;Shishir Tiwari;R.K.Singh .Characterization of toughened bonded interface against fracture and impact loads[J].International Journal of Adhesion & Adhesives,2005(6):527-533. |
| [11] | Martínez M A;Chocron I S;Rodríguez J et al.Confined com-pression of elastic adhesives at high rates of strain[J].International Journal of Adhesion and Adhesives,1998,18(8-9):375-383. |
| [12] | Yokoyama T. .Experimental determination of impact tensile properties of adhesive butt joints with the split Hopkinson bar[J].The Journal of Strain Analysis for Engineering Design,2003(3):233-245. |
| [13] | Mitsuaki Katoh;Kazumasa Nishio;Tomiko Yamaguchi .Materials evaluation of diffusion bonded steel bar and its impact characteristics[J].NDT & E international: Independent nondestructive testing and evaluation,2002(4):263-271. |
| [14] | G.Belingardi;L.Goglio;M.Rossetto .Impact behaviour of bonded built-up beams:experimental results[J].International Journal of Adhesion & Adhesives,2005(2):173-180. |
| [15] | Adams R D;Harris J A .A critical assessment of the block impact test for measuring the impact strength of adhesive bonds[J].Interna-tional Journal of Adhesion and Adhesives,1996,16(02):61-71. |
| [16] | Kihara Koichiro;Isono Hiroaki;Yamabe Hidetoshi et al.A study and evaluation of the shear strength of adhesive layers subjected to impact loads[J].International Journal of Adhesion and Adhesives,2003,23(04):253-259. |
| [17] | 李玉龙,索涛,郭伟国,胡锐,李金山,傅恒志.确定材料在高温高应变率下动态性能的 Hopkinson杆系统[J].爆炸与冲击,2005(06):487-492. |
| [18] | Pang Su-Seng;Yang Chihdar;Zhao Yi .Impact response of single-lap composite joints[J].Composites Engineering,1995,5(08):1011-1027. |
| [19] | Sato C;Ikegami K .Dynamic deformation of lap joints and scarf joints under impact loads[J].Inter-national Journal of Adhesion & Adhesives,2000,20(01):17-25. |
| [20] | Vaziri A;Nayeb-Hashemi H .Dynamic response of tubular joints with an annular void subjected to a harmonic axial load[J].International Journal of Adhesion and Adhesives,2002,22(05):367-373. |
| [21] | 江帆,刘堂红.帽型、点焊薄壁柱壳轴向挤压性能分析[J].中国铁道科学,2003(02):103-108. |
| [22] | 徐修祝,涂善东,徐思浩.胶接接头断裂及相关断裂准则探讨[J].石油化工设备,2005(03):37-40. |
| [23] | Yancey Robert N.Impact Modeling of Spot Welds.Materials processing and design:Modeling,simulation and applications[A].New York:Amer Inst Physics,2004 |
| [24] | A. Combescure;F. Delcroix;L. Caplain;S. Espanol;P. Eliot .A finite element to simulate the failure of weld points on impact[J].International journal of impact engineering,2003(7):783-802. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%