在室温下对Al-5Ti-1B合金进行8道次等径角挤压试验,并运用X射线衍射仪、光学显微镜和扫描电镜等手段研究了变形前后Al-5Ti-1B合金中第二相的变化.结果表明:等径角挤压可以使Al-5Ti-1B合金中第二相颗粒细化,并改善了第二相颗粒分布的均匀性;随挤压次数的增加,大块状TiAl3相由20~80μm粗晶粒细化到5μm左右;呈团块状且分布不均的TiB2经挤压后得到均匀分布;硬颗粒第二相同时对基体有剪切作用,这也是晶粒细化的原因之一.
参考文献
| [1] | 苏学常.国产Al-Ti-B细化剂的冶金质量[J].轻金属,1996(01):48-51. |
| [2] | 冯汝田 .推广Al-Ti-B晶粒细化剂提高铝材质量与经济效益[J].轻合金加工技术,1991,19(06):1-4. |
| [3] | 赵志业.金属塑性加工力学[M].北京:冶金工业出版社,2003 |
| [4] | 张柏清,马洪涛,李建国,方鸿生.变形对中间合金细化剂组织及细化性能的影响[J].金属热处理,1999(06):1-2. |
| [5] | 刘相法;杨阳;边秀房.杆状AlTiB中间合金的组织形貌及晶粒细化行为的研究[J].铸造,1996(10):6-9. |
| [6] | Mayes C D;McCartney D G;Tatlock G J .Influence of microstructure on grain refining performance of Al-Ti-B master alloys[J].Journal of Materials Science and Technology,1993,9(02):97-103. |
| [7] | 刘相法;边秀房;李辉 等.AlTiB中间合金细化效果的组织遗传效应[J].金属学报,1996,32(02):149-153. |
| [8] | Segal VM. .Severe plastic deformation: simple shear versus pure shear[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):331-344. |
| [9] | Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189. |
| [10] | Furukaw A M;Iwahashi Y;Horita Z et al.Shearing characteristics associated with equal-channel angular pressing[J].Materials Science and Engineering,1998,A257:328-332. |
| [11] | Y.Iwahashi;Z.Horita;M.Nemoto .An investigation of microstructural evolution during equal-channel angular pressing[J].Acta materialia,1997(11):4733-4741. |
| [12] | 刘先兰 .等径角挤压法制备块体超细晶材料的工艺研究[D].广西大学,2006. |
| [13] | Valiev RZ.;Alexandrov IV.;Islamgaliev RK. .Bulk nanostructured materials from severe plastic deformation [Review][J].Progress in materials science,2000(2):103-189. |
| [14] | Chang J Y;Yoon J S;Kim G H .Development of submicron sized grain during cyclic equal channel angular pressing[J].Scripta Materialia,2001,45(03):347-354. |
| [15] | Farrasse S;Segal V M;Hartwig K T et al.Development of a submicrometer grained microstructure in aluminum 6061 using equal channel angular extrusion[J].Journal of Materials Research,1997,12:1253-1261. |
| [16] | Valiev R Z;Komikov A V;Mulyokov R R .Structure and properties of ultrafine-grained materials produced by severe plastic deformation[J].Materials Science and Engineering,1993,A168:141-148. |
| [17] | 毕见强 .2A12铝块体超细晶材料的制备、模拟及细化机制的研究[D].山东大学,2005. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%