欢迎登录材料期刊网

材料期刊网

高级检索

研究了非调质钢30MnVS奥氏体化后在400~600 ℃等温转变的组织构成及显微硬度变化;采用连续截面和计算机辅助重建法观察了铁素体的三维形貌.结果表明: 随处理温度的降低,针状铁素体量减少,贝氏体量增加;冷却速度的提高,有利于组织的细化并使针状铁素体数量增加.晶界铁素体在三维空间呈弯曲板状;晶内铁素体在夹杂物上形核,其三维形貌不同于二维的等轴状,而呈扁长片状,应归属于针状铁素体.

参考文献

[1] D. K. Matlock;G. Krauss;J. G. Speer .Microstructures and properties of direct-cooled microalloy forging steels[J].Journal of Materials Processing Technology,2001(3):324-328.
[2] F. ISHIKAWA;T. TAKAHASHI .The formation of intragranular ferrite plates in medium-carbon steels for hot-forging and its effect on the toughness[J].ISIJ International,1995(9):1128-1133.
[3] A. R. KHODABANDEH;M. JAHAZI;S. YUE .Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel[J].ISIJ International,2005(2):272-280.
[4] Díaz M;Madaríaga I;Rodriguez-ibabe J M et al.Improvement of Mechanical Properties in Structural Steels by Development of Acicular Ferrite Microstructures[J].Journal of Constructional Steel Research,1998,46:413-414.
[5] C. Garcia de Andres;C. Capdevila;I. Madariaga .Role of molybdenum in acicular ferrite formation under continuous cooling in a medium carbon microalloyed forging steel[J].Scripta materialia,2001(6):709-716.
[6] I.Madariaga;I.Gutierrez;C.Garcia-de Andres;C.Capdevila .Acicular ferrite formation in a medium carbon steel with a two stage continuous cooling.[J].Scripta materialia,1999(3):229-235.
[7] Madariaga I.;Gutierrez I. .Role of the particle-matrix interface on the nucleation of acicular ferrite in a medium carbon microalloyed steel[J].Acta materialia,1999(3):951-960.
[8] Yokomizo T.;Enomoto M.;Umezawa O.;Spanos G.;Rosenberg RO. .Three-dimensional distribution, morphology, and nucleation site of intragranular ferrite formed in association with inclusions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):261-267.
[9] C. CAPDEVILA;J. P. FERRER;C. GARCIA-MATEO .Influence of deformation and molybdenum content on acicular ferrite formation in medium carbon steels[J].ISIJ International,2006(7):1093-1100.
[10] 吴开明.连续截面和计算机辅助重建法观察Fe-0.28C-3.0Mo合金钢退化铁素体的三维形貌[J].金属学报,2005(12):1237-1242.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%