通过研究氧化铝泡沫陶瓷增强预制体上化学镀镍的前处理工艺，尤其是粗化、活化、敏化等步骤，并调整化学镀镍配方及工艺，成功地镀覆了厚度为数十个微米的镍层，初步解决了氧化铝陶瓷与铝基体(ZL102)的界面润湿问题。磨损试验结果证明效果明显。
The electroless nickel plating process was proposed by the authors for improving the wetting performance of porous alumina ceramic, so as to improve the properties of aluminum based composite. The pretreatment was emphasized in the discussion.
参考文献
| [1] | 王薇薇.用金属基三维连续网状多孔陶瓷复合材料制作静压气体轴承零件可行性研究[J].机械工程材料,1998(04) |
| [2] | 尧军平.铸铁基三维连续网状多孔陶瓷复合材料的阻尼性能[J].热加工工艺,1999(01) |
| [3] | 陈华辉.现代复合材料[M].北京:中国物质技术出版社,1998 |
| [4] | 曾华梁.电镀工艺手册[M].北京:机械工业出版社,1989 |
| [5] | 《电镀手册》编写组.电镀手册[M].北京:国防工业出版社,1995 |
| [6] | Longlois S;Coetret F .Flow-through and flow-by porous electrodes of nick el foam[J].Journal of Applied Electrochemistry,1990,20:748. |
| [7] | Montillet A .Application of metallic foams in electrochemical reactors cf fil ter-press type[J].Journal of Applied Electrochemistry,1993,23:1045. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%