用TJ-HL-5000 CO2激光器对4种不同Co基材料进行了激光熔覆研究，对熔覆层抗裂性进行了对比，分析了合金元素对熔覆层抗裂性的影响，指出WFLC-08及WFLC-11两种材料具有较高的抗裂性和耐磨性，是能满足激光熔覆工艺要求的Co基合金粉末材料。
An investigation was made on the four kinds of cobalt based alloy powder for laser cladding with TJ-HL-5000 CO2 laser. The effects of alloy elements on the cracking resistance behavior of the coating were studied and the comprehensive comparisons were discussed. The authors pointed out that the coatings cladded with WFLC-08 and WFLC-11 cobalt based alloy powder materials had the advantages both in cracking resistance and in wear resistance.Thus met the requirements of laser cladding.
参考文献
| [1] | Jeng M C .Wear behaviour of cobalt - based alloys in laser surface cladding[J].Surface and Coatings Technology,1991,48:225-231. |
| [2] | Pigurova N;Komurka J;Sroboda M.Structure and phase steel[J].材料科学与工艺(英文版),1993(02) |
| [3] | Li Yanxiang;Ma Jian .Study on overlapoing in the laser cladding process[J].Sruface and Coating Technology,1997,90:1-5. |
| [4] | Frenk A;Karh W .High speed laser cladding: Solidificatiou conditions and microstructure of a cobalt - based alklloy[J].Materials Science and Engineering,1993,A174:339-342. |
| [5] | Tiziam A .Laser cladding stellite alloys on γ-stainless steel[J].Materials Science and Engineering,1987,88(01):171-175. |
| [6] | Gassmann R C .Laser cladding with ( WC + W2C)/Co-Cr-C and ( WC +W2C)/Ni-B-Si comosites for enhanced abrasive wear resistance[J].Materials Science and Technology,1996(12):691-696. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%