采用扫描电镜、化学分析法和电化学方法，详细研究了阴极电流密度、镀液温度、镀液中Mo S2微粒浓度等工艺条件对Ni-MoS2自润滑复合镀层硬度及摩擦学性能的影响，获得了制备复合镀层的最佳工艺参数为：MoS2 10 g/L，分散剂0.1 mg/g MoS2，表面活性剂C 10 -6 L/L，pH值4.8，温度55 ℃，Dk=1 A/dm\+2，空气搅拌。按此工艺获得的复合镀层具有显著的耐磨减摩功效。
The effects of cathodic current density temperature and MoS2 contents in bath on the hardnss and tribological characteristics of NiMoS2 selflubricating composite coating were investigated by SEM and elec-trochemical methods. The optimum technological parameters were MoS2 10 g/L dispering agent 0.1 mg/g MoS2 surfactant 10-6 L/L pH value 4～8 Dk=1 A/dm2 55 ℃ air stirring.
参考文献
| [1] | 陈建敏 .铝质材料的摩擦学表面改性[J].摩擦学学报,1994,14(03):259. |
| [2] | Raj N;Surjit S .Composite Chromium Coatings Containing Tungsten Carbide[J].Metal Finishing,1983,81(03):45. |
| [3] | 杜克勤.复合电沉积机理研究进展[J].电镀与精饰,1995(06):21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%