欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料保护
  4. 环保无害化电镀的研究进展

材料保护, 2001, 34(8): 1-4. doi: 10.3969/j.issn.1001-1560.2001.08.001

环保无害化电镀的研究进展

屠振密 1, , 张景双 2, , 杨哲龙 3,

1.哈尔滨工业大学应用化学系

2.哈尔滨工业大学应用化学系

3.哈尔滨工业大学应用化学系

关键词： 电镀 , 环保 , 清洁生产 , 环境污染

Evolution of Innocuous and Non-Pollution Electroplating

针对电镀溶液中存在的一些有害有毒物质,如CN-、F-、Cd2+、Pb2+、Cr6+等,详细讨论了无氰化电镀、无氟无铅电镀、代铬电镀、代镉电镀等工艺的研究和应用,对不同镀层性能进行比较,并根据我国的具体条件提出了促进电镀可持续清洁化生产的措施.

参考文献

[1] Stevenson Milt.Which zinc do you use?[J].Products Finishing,1998(02):72.
[2] Natorki TJ .Zinc and zinc alloy plating[J].Metal Finishing,1992,90(03):15.
[3] 电镀锌与锌合金的特性应用及发展[J].材料保护,2000(01):37-42.
[4] Liana Anii;Magda Siteavu.Corrosion behavior of zinc and zinc alloy deposition[J].Corrosion Prevention and Control,1992(02)
[5] 范宏义;胡铁骑.电镀行业环境无害化技术需求调查分析[M].金华:出版者不详,2000:12-15.
[6] 我国电镀工艺环保现状及其发展建议[J].材料保护,2000(01):46-50.
[7] 陈惠国.电镀废水治理技术发展动态[A].金华:出版者不详,2000
[8] 陈全寿.电镀技术的发展展望[J].表面技术,2000(03):1-3.
[9] DossSK .Plating of 60/40 tin/lead solder for head metallurgy[J].Plating and Surface Finishing,1997,84(01):38.
[10] Hirano S;lzaki T .Study of HCD electroplating by phenoisulfonic acid baths[J].Plating and Surface Finishing,1997,84(07):54.
[11] Genmier A;Richter H .Preventive process maintenance in tin/lead microplating[J].Plating and Surface Finishing,1997,84(10):64.
[12] Yan Y H .A comparative study of halogen and methanesufonic acid electroplating processes[J].Plating and Surface Finishing,1999,86(08):48.
[13] 袁国伟.高稳定性无氟电镀非光亮Sn-Pb合金的工艺技术[A].四川绵阳:出版者不详,2000
[14] 赵平堂.甲基磺酸盐Sn-Pb合金电镀在带材电镀中的应用[J].材料保护,2000(03):13-14.
[15] 池建明.甲磺酸电镀Sn-Pb工艺的特点[A].绵阳:出版者不详,2000
[16] KatayamaJB .Solderability of double layer deposits of with tin[J].Metal Finishing,1996,94(01):12.
[17] Duane N;EdicottDW .The challenge of a lead-free finish for semiconductor pins[J].Metal Finishing,1997,95(01):50.
[18] [P].US Pat,5911866;5948235
[19] Kondo T;Obata K et al.Bright tin/silver alloy electrodeposition from an organic sulfonate bath[J].Plating and Surface Finishing,1998,85(02):51.
[20] Jordan M .Lead free tin alloys as substitutes for tin-lead alloy plating[J].Transactions of the Institute of Metal Finishing,1997,75(04):149.
[21] 任清.电镀锡-铋合金工艺[J].电镀与精饰,2000(02):24-24,37.
[22] 中国电子电镀委员会.非氟锡-铅可焊性镀层及无铅无氟可焊性镀层的目前概况[J].电子电镀通讯,2000(09):2.
[23] 蔡积庆 .锡铋合金电镀[J].表面技术,2000,29(03):30.
[24] E1-Sharif M .Replacing hexavalent chromium in plating[J].Transactions of the Institute of Metal Finishing,1997,75(06):B143.
[25] George E. Shahin .Alloys are promising as chromium or cadmium substitutes[J].Plating & Surface Finishing,1998(8):8-14.
[26] Jalota S K .Tin-nickel alloy plating[J].Metal Finishing Guidebook,1999,97(01):325.
[27] Atanassov N;Cencheva K .Properties of nickel-tungsten alloy electrodeposited from sulfonmate electrolyte[J].Plating and Surface Finishing,1997,84(04):62.
[28] Huang L;Dong J X .Studies on the mechanism, structure and microhardness of Ni-W alloy elecrodeposits[J].Transactions of the Institute of Metal Finishing,1999,77(05):185.
[29] Agladze T;Bagaev S .Comparison of physical-chemical properties Cr, NiP,Ni-Mo, Ni-W-P and Mn-Zn alloys coatings[J].Transactions of the Institute of Metal Finishing,1997,75(01):30.
[30] James H. Lindsay .Special Conference Comes to Grips With Hexavalent Chromium[J].Plating & Surface Finishing,1995(2):19-23.
[31] BleelesT;ShawhanG .New electroless nickel technology as an altemate to hard chromium plaing[J].Metal Finishing,1998,96(10):21.
[32] Donald Baudrand .Electroless processes[J].Plating & Surface Finishing,1999(11):44-46.
[33] Michael D F .Composite electroless nickel coatings for the aerospace and airline industries[J].Plating and Surface Finishing,1998,85(11):245.
[34] Tsugito Y;Toyohito K .Deposition process and behavior of Ni-P alloy[J].Metal Finishing,1993,91(11):73.
[35] Zhang H Z;Zhang X J .Structure and properties of electroless Ni-B alloy[J].Plating and Surface Finishing,1993,80(04):80.
[36] 屠振密.电镀合金原理与工艺[M].北京:国防工业出版社,1993
[37] 郭鹤桐;张三元.复合镀层[M].天津:天津大学出版社,1991
[38] S. Eskin;O. Berkh;G. Rogalsky;J. Zahavi .Co-W alloys for replacement of conventional hard chromium[J].Plating & Surface Finishing,1998(4):79-84.
[39] Lindsay J .Advanced techniques for replacing chromium[J].Plating and Surface Finishing,1997,84(02):24.
[40] Brenner A.Electrodeposition of alloy[M].New York:Academic Press,1963
[41] Zhang B W;Hu W Y .Preparation, formation and corrosion for Ni-W-P amorphous alloys[J].Transactions of the Institute of Metal Finishing,1996,74(02):69.
[42] Brooman E.W.; .Corrosion Performance of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Chromium-Part I[J].Metal finishing,2000(7):38-43.
[43] Brooman E.W.; .Corrosion Performance of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings: Chromium-Part II[J].Metal finishing,2000(8):39-45.
[44] El-Sharif M;Chisholim C V .Electrodeposition of thick chromium coatings from an environmentally acceptable chromium ( Ⅲ ) glycine complex[J].Transactions of the Institute of Metal Finishing,1999,77(04):39.
[45] T. Pearson;E. Long .Electrodeposition from trivalent chromium electrolytes[J].Transactions of the Institute of Metal Finishing,1998(6):B83-B85.
[46] Lansdell P;Farr J P G .The corrosion resistance of chromium electroplated from trivalont and hexavalent chromium plating solutions[J].Transactions of the Institute of Metal Finishing,1997,75(06):39.
[47] El-Sharif Ma S .Environmentally acceptable process for electrodeposition of hard chromium( Ⅲ )electrolyte[J].Transactions of the Institute of Metal Finishing,1995,73(01):19.
[48] M.El-Sharif .Replacing hexavalent chromium in electroplating[J].Transactions of the Institute of Metal Finishing,1997(6):B143-B147.
[49] Zen-mi Tu;Zhe-long Yang.Pulse plating with a trivalent chromium plating bath[J].Plating and Surface Finishing,1990(10):55.
[50] Brahim S K;Watson A .Corrosion and wear resistance of thick chromium deposits from accelerated Cr( Ⅲ ) electrolytes[J].Transactions of the Institute of Metal Finishing,1998,76(04):156.
[51] 杨哲龙,屠振密,张景双,安茂忠.三价铬电镀的新进展[J].电镀与环保,2001(02):1-3.
[52] Ibrahim K;Watson A .The role of formic acid and methanol on spectiation rate and quality in the electrodeposition of chromium from trivalent electrolytes[J].Transactions of the Institute of Metal Finishing,1997,75(05):181.
[53] James H .Lindsay[J].Plating and Surface Finishing,1999,86(11):40.
[54] Brooman E W .Alternatives to cadmium coatings for electronic/electrical applications[J].Plating and Surface Finishing,1993,80(02):9.
[55] Brooman E W .Corrosion performance of environmentally acceptable alternative to cadmium and chromium coatings: Cadmium Part 1[J].Metal Finishing,2000,98(05):42.
[56] Brooman E.W.; .Corrosion Behavior of Environmentally Acceptable Alternatives to Cadmium and Chromium Coatings-Cadmium, Part II[J].Metal finishing,2000(6):106-115.
[57] Baldwin K R;Smith C J E .Advances in replacements for cadmium plating in aerospace applications[J].Transactions of the Institute of Metal Finishing,1996,74(06):202.
[58] Show G .Long-term performance of cadmium alternatives[J].Products Finishing,1998,63(02):66.
[59] Shahin G E .Alloys are promishing as chromium or cadmium substitutes[J].Plating and Surface Finishing,1998,85(08):8.
[60] Thomson M D .Zinc alloys--The Boing alternative to cadmium[J].Transactions of the Institute of Metal Finishing,1996,74(03):3.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net