欢迎登录材料期刊网

材料期刊网

高级检索

热障涂层(TBC)是目前最为先进的高温防护涂层之一,其具有良好的隔热效果与抗高温氧化性能.综述了TBC的制备工艺、结构特征与涂层材料的选择,归纳了涂层的主要失效形式,并对失效机理加以分析.

参考文献

[1] Tsai H;Tsai P .Performance of laser- glazed plasma - sprayed (ZrO2-12wt.%Y2O3)/ (Ni-22wt.%Cr- 10wt.%Al- 1wt.%Y) thermal barrier coatings in cyclic oxidation tests[J].Surface and Coatings Technology,1995,71(01):53.
[2] Czech N;Fietzek H;Juez- Lorenzo M .Studies of the bond-coat oxidation and phase structure of TBCs[J].Surface and Coatings Technology,1999,113(1/2):157.
[3] Czech N;Schmitz F;Stamm W.Microstructural analysis of the role of rhenium in advanced MCrAlY coatings[J].Surface and Coatings Technology,1995(76-77):28.
[4] Hutchinson JW.;Evans AG. .On the delamination of thermal barrier coatings in a thermal gradient[J].Surface & Coatings Technology,2002(2/3):179-184.
[5] Ingham H S;Pshepard A.Mecto Flame Spray Handbook Vol Ⅱ Powder Processes (2nd ed)[M].OH Cincinati:Mecto Inc,1964
[6] Dennism P R;Gates D W;Smith C R.Technology survey-plasma jet technology[M].NASA SP5033:National Aeronautics and Space Administration Inc,1965
[7] Demaray R E;Halman W K;Shen S.Development of electron beam physical vapor deposition of ceramic coatings[A].EPRI RD - 2369 - SR:Electric Power Research Institute,1981
[8] Bose S;Demasi- Marcin J .Thermal barrier coating experience in gas turbine engines at Pratt & Whitney[J].Journal of Thermal Spray Technology,1997,6(01):99.
[9] Kobayashi A .Formation of high hardness zirconia coatings by gas tunnel type plasma spraying[J].Surface and Coatings Technology,1997,90(03):197.
[10] Oature N P;Gell M;Jordan E H.Thermal barrier coatings for gas- turbineengine applications[J].SCIENCE,2000(296):280.
[11] Funke C;Mailand JC;Siebert B;Vassen R;Stover D;Univ Calif Santa Barbara Dept Mech & Environm Engn Santa Barbara CA 93106 USA. .Characterization of ZrO2-7 wt% Y2O3 thermal barrier coatings with different porosities and FEM analysis of stress redistribution during thermal cycling of TBCs[J].Surface & Coatings Technology,1997(1/3):106-111.
[12] Haynes J A;Rigney E D;Ferber M K.Oxidation and degradation of a plasma - sprayed thermal barrier coating system[J].Surface and Coatings Technology,1996(86/87):102.
[13] Matthews A;Young SJ;Joseph M;Rebholz C;Schneider JM;Dowey SJ;Northwestern Univ Adv Coating Technol Grp Evanston IL 60201 USA.;Ion Coat Ltd Hull HU16 7TW N Humberside England. .Partially yttria-stabilized zirconia coatings produced under plasma-assisted EBPVD with bipolar pulsed bias and under electron bombardment-assisted positive bias conditions[J].Surface & Coatings Technology,1997(1/3):123-130.
[14] 郭洪波,宫声凯,徐惠彬,刘福顺.EB-PVD梯度热障涂层的制备及其热疲劳性能[J].金属学报,2000(07):703-706.
[15] Lugscheider E.;Dopper G.;Barimani C. .Ceramic thermal barrier coatings deposited with the electron beam-physical vapour deposition technique[J].Surface & Coatings Technology,1998(1/3):1221-1227.
[16] Bi X;Xu H;Gong S.Investigation of the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition[J].Surface and Coatings Technology,2000(130):122.
[17] 张玉娟,孙晓峰,金涛,管恒荣,胡壮麒.爆炸喷涂NiCrAlY涂层的高温抗氧化行为[J].金属学报,2003(02):189-192.
[18] Zhang Y J;Sun X F;Jin T .1050℃ isothermaloxidation behavior of detonation gun sprayed NiCrAlY coating[J].Surface and Coatings Technology,2002,161(2/3):302.
[19] 楼翰一;唐幼军 .K17F高温合金溅射微晶层的抗高温氧化行为[J].金属学报,1994,30(03):B109.
[20] 王福会;楼翰一 .CoCrAl微晶涂层对TiAl金属间化合物抗高温氧化性能的影响[J].金属学报,1993,29(03):B115.
[21] 唐光麟;王福会 .涂层对Ti60合金高温氧化性能及力学性能的影响[J].金属学报,1998,34(03):325.
[22] Miller R A .Thermal barrier coatings for aircraft engines:history and directions[J].Journal of Thermal Spray Technology,1997,6(01):35.
[23] Mitchell DORFMAN,邵青.提高热保护性能的热障涂层[J].国外机车车辆工艺,2003(02):14-15.
[24] Beele W;Marijnissen G;Lieshout A V.The evolution of thermal barrier coatings-status and upcoming solutions for today's key issues[J].Surface and Coatings Technology,1999(121):61.
[25] Chaim R;Ruhle M;Heuer A H .Microstructural evolution in a ZrO2 - 12wt% Y2O3 ceramic[J].Journal of the American Ceramic Society,1985,68(08):427.
[26] Li MH.;Sun XF.;Gong SK.;Zhang ZY.;Guan HR.;Hu ZQ. .Phase transformation and bond coat oxidation behavior of EB-PVD thermal barrier coating[J].Surface & Coatings Technology,2004(2):209-214.
[27] Leushake U;Krell T;Schulz U;Peters M;Kaysser WA;Rabin BH;Idaho Natl Engn & Environm Lab Idaho Falls ID 83415 USA. .Microstructure and phase stability of EB-PVD alumina and alumina/zirconia for thermal barrier coating applications[J].Surface & Coatings Technology,1997(1/3):131-136.
[28] Harrison W N;Moore D G;Richmond J C.Review of an investigation of ceramics coating for metallic turbine parts and other high temperature applications[M].NACA TN - 186:National Aeronautics and Space Administration Inc,1947
[29] Chwa SO.;Ohmori A. .Microstructures of ZrO2-8wt.%Y2O3 coatings prepared by a plasma laser hybrid spraying technique[J].Surface & Coatings Technology,2002(2/3):304-312.
[30] Ramaswamy P;Seethatamu S .Evaluation of CaO- CeO2 -partially stabilized zirconia thermal barrier coatings[J].Ceramics International,1999,25(04):317.
[31] Mommer N;Lee T;Gardner J A .Stability of monoc and tetra zirconia at low oxygen partial pressure[J].Journal of Materials Research,2000,15(02):377.
[32] Leoni M;Jones L;Scardi P.Phase stability of scandia yttriastabilized zirconia TBCs[J].Surface and Coatings Technology,1998(108/109):107.
[33] Schulz U;Fritscher K;Peters M.EB-PVD Y2O3 - and CeO2/Y2 O3 - stabilized zirconia thermal barrier coatings- crystal habit and phase composition[J].Surface and Coatings Technology,1996(82):259.
[34] Stecura S.Effects of compositional changes on the performance of a thermal barrier coating system[M].NASA TM - 78976:National Aeronautics and Space Administration Inc,1978
[35] Miller R A;Smialek J L;Garlick R G.Sci & Technol of Zirconia[J].Advance in Ceramics,1981(03):241.
[36] Niranatlumpong P;Ponton C B;Evans H E .The Failure of Protective Oxides on Plasma-Sprayed NiCrAlY Overlay Coatings[J].Oxidation of Metals,2000,53(3-4):241.
[37] Haynes J A.Potential influences of bond coat impurities and void growth on premature failure of EB-PVD TBCs[J].Arcripta Mater,2001(44):1147.
[38] Rabiei A.;Evans A.G. .FAILURE MECHANISMS ASSOCIATED WITH THE THERMALLY GROWN OXIDE IN PLASMA-SPRAYED THERMAL BARRIER COATINGS[J].Acta materialia,2000(15):3963-3976.
[39] Thurn G;Scheider G A;Bahr H A.Toughness anisotropy and damage behavior of plasma sprayed ZrO2 thermal barrier coatings[J].Surface and Coatings Technology,2000(123):147.
[40] Demasi-Marcin J T;Grupta D K.Protective coatings in the gas turbine engine[J].Surface and Coatings Technology,1994(68/69):1.
[41] Hu W.;Sun X.;Li S.;Guan H. .Graded coatings prepared by plasma spraying with Ni-coated ZrO2 powders[J].Surface & Coatings Technology,1998(1/2):102-108.
[42] He MY.;Hutchinson JW.;Evans AG. .Effects of morphology on the decohesion of compressed thin films[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(2):168-181.
[43] Bordeaux F;Saint Jacques R G;Moreau C.Thermal shock resistance of TiC coatings plasma sprayed onto macroroughened substrates[J].Surface and Coatings Technology,1992(53):49.
[44] 王昆林;张庆波 .La2O3对镍基合金激光熔覆层耐蚀性的影响[J].中国腐蚀与防护学报,1998,18(03):237.
[45] Chang KC.;Chen C.;Wei WJ. .Oxidation behavior of thermal barrier coatings modified by laser remelting[J].Surface & Coatings Technology,1998(3):197-204.
[46] 张立德;牟季美.纳米材料科学[M].沈阳:辽宁工业出版社,1994
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%