欢迎登录材料期刊网

材料期刊网

高级检索

通过扫描电镜(SEM)分析、磷化膜增重和开路电位-磷化时间的测量及中性盐雾(NSS)试验,研究了胶质磷酸钛表调预处理对热镀锌层表面磷酸锌转化膜的影响.结果表明,热镀锌钢经胶质磷酸钛表调预处理后再磷化,与不经表调直接磷化相比,磷酸锌晶体的形核率与生长速率明显提高,可获得较细小致密的磷酸锌晶体和较大的膜层增重;且前者由于磷酸锌晶体细化和覆盖率提高,磷化膜的耐蚀性也有所增强.

参考文献

[1] 李方杰.汽车车身的低(常)温磷化[J].材料保护,1995(10):23.
[2] Van Roy I.;Goeminne G.;Terryn H. .Study of the phosphating treatment of aluminium surfaces: role of the activating process[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,1998(1/2):89-96.
[3] Wolpers M.;Angeli J. .Activation of galvanized steel surfaces before zinc phosphating - XPS and GDOES investigations[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2001(1/4):281-291.
[4] 王成;江峰 .用电化学方法研究LY12铝合金铬磷化[J].腐蚀与防护,2002,23(01):15.
[5] Kouisni L;Azzi M;Dalard F;Maximovitch S .Phosphate coatings on magnesium alloy AM60 Part 2: Electrochemical behaviour in borate buffer solution[J].Surface & Coatings Technology,2005(2/3):239-246.
[6] 周谟银.利用电流和电压的变化研究磷化膜的生长过程[J].腐蚀科学与防护技术,1995(04):341.
[7] Sun X.;Susac D.;Li R.;Wong KC.;Foster T.;Mitchell KAR. .Some observations for effects of copper on zinc phosphate conversion coatings on aluminum surfaces[J].Surface & Coatings Technology,2002(1):46-50.
[8] Susac D;Sun X;Li RY;Wong KC;Wong PC;Mitchell KAR;Champaneria R .Microstructural effects on the initiation of zinc phosphate coatings on 2024-T3 aluminum alloy[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2004(1):45-59.
[9] 周玉;武高辉.材料分析测试技术[M].哈尔滨:哈尔滨工业大学出版社,1998
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%