研究了液态硅参与下的反应烧结碳化硅的工艺参数、显微组织对其电阻率的影响.随着烧结气氛压力和成型压力增加,反应烧结碳化硅中游离硅量减少,电阻率增加.其烧结机理以碳的溶解及碳化硅的淀析过程为主.
参考文献
[1] | Popper P.The preparation of dense self bonded silicon carbide[A].Heywood,London,1960:209-219. |
[2] | Forrest C W;Kennedy P;Shennan J V.The fabrication and properties of self-bonded silicon carbide bodies[A].British Ceramic Research Association,Stoke-on-Trent,1972:99-123. |
[3] | Ness J N;Page T F .Microstructure evolution in reaction bonded silicon carbide[J].Journal of Materials Science,1986,21:1377-1397. |
[4] | Hozer L.;Chiang YM.;Lee JR. .REACTION-INFILTRATED, NET-SHAPE SIC COMPOSITES[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(1/2):131-143. |
[5] | Hayato NANRI;Mitsuru SHIRAI;Nobuyuki TAKEUCHI et al.Oxidation behavior of Si-SiC at high temperature[J].Journal of the Ceramic Society of Japan,1997,105(01):15-20. |
[6] | 丁子上.硅酸盐物理化学[M].北京:中国建筑工业出版社,1980:126. |
[7] | 梁训裕;刘景林.碳化硅耐火材料[M].北京:冶金工业出版社,1981:83. |
[8] | Yet-Ming Chiang;Robert P Messner;Chrysanthe B.Terwilliger .Reaction-formed silicon carbide[J].Materials Science and Engineering A,1991,144:63-74. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%