简要介绍了压电铁电材料的种类及发展历程,重点比较了压电陶瓷和压电单晶在性能和制备中的差异,提出了制备织构型压电陶瓷的必要性.以钙钛矿型PMN-PT压电陶瓷为例,提出了产生织构结构的简便有效的方法-模板晶粒生长法(TGG法);同时具体分析了制备PMN-PT粉体、模板粒子的常用方法以及使模板产生定排列的方法.论述了目前已经取得的一些成果,提出了该体系织构材料今后的发展方向和应用前景.
参考文献
[1] | 杨祖培;高峰;周欣山.含铅弛豫铁电陶瓷的制备技术[J].功能材料,1998(z1):532-535. |
[2] | Kwon S;Sabilsky E M;Messing G L .Low-temperature reactive sintering of 0.65PMN@0.35PT[J].Journal of the American Ceramic Society,2000,84(03):648-50. |
[3] | 杨亲民 .智能材料的研究与开发[J].功能材料,1999,30(06):575-581. |
[4] | 甘国友,严继康,孙加林,陈敬超,张家涛.压电复合材料的现状与展望[J].功能材料,2000(05):456-459,463. |
[5] | Robert F S .Materials science: shape-changing crystals get shiftier[J].Science,1997,275:1878. |
[6] | Huaxiang F;Ronald E C .Polarization rotation mechanism for ultrahigh electromechanical response in single-crystal piezoelectrics[J].Nature,2000,403:281-283. |
[7] | 夏峰;姚熹 .驰豫型铁电体在准同型相界的压电性能[J].功能材料,1999,30(06):582-584. |
[8] | 王评初,罗豪,李东林,潘晓明,陈辛尘,殷之文.PMN-PT单晶与陶瓷在性能及相变方面的特点[J].无机材料学报,2001(01):56-62. |
[9] | 李国荣,罗豪,殷庆瑞.PMN-PT驰豫铁电单晶及其超声换能器性能研究[J].无机材料学报,2001(06):1077-1083. |
[10] | 李文卓,赵万生,詹涵菁,吴湘.压电/电致伸缩材料及驱动器的新技术与应用[J].压电与声光,2001(04):259-264. |
[11] | 李尚平,徐永利,苏建华,田莳.驱动器用陶瓷材料发展与展望[J].压电与声光,1999(06):483-487. |
[12] | Seung-Eek Park;Shrout T.R. .Characteristics of relaxor-based piezoelectric single crystals for ultrasonic transducers[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,1997(5):1140-1147. |
[13] | Park SE.;Shrout TR. .ULTRAHIGH STRAIN AND PIEZOELECTRIC BEHAVIOR IN RELAXOR BASED FERROELECTRIC SINGLE CRYSTALS[J].Journal of Applied Physics,1997(4):1804-1811. |
[14] | 王超群;Bunge H J .陶瓷材料织构研究的某些进展[J].硅酸盐学报,1995,23(01):858-91. |
[15] | Seong-Hyeon Hong;Gary L. Messing .Development of textured mullite by templated grain growth[J].Journal of the American Ceramic Society,1999(4):867-872. |
[16] | Kan Yanmei;Wang Peiling;Li Yongxiang et al.Fabrication of textured bismuth titanate by templated grain growth using aqueous tape casting[J].Journal of the European Ceramic Society,2003,23(13-14):2163-2169. |
[17] | Jeffrey A. Horn;S. C. Zhang;U. Selvaraj;Gary L. Messing;Susan trolier-McKinstry .Templated grain growth of textured bismuth titanate[J].Journal of the American Ceramic Society,1999(4):921-926. |
[18] | Duran C.;McKinstry S.T. .Fabrication and Electrical Properties of Textured Sr_(0.53)Ba_(0.47)Nb_2O_6 Ceramics by Template Grain Growth[J].Journal of the American Ceramic Society,2000(9):2203-2213. |
[19] | Ender Suvaci;Matthew M. Seabaugh .Reaction-based Processing of Textured Alumina by Templated Grain Growth[J].Journal of the European Ceramic Society,1999(13/14):2465-2474. |
[20] | Rehrig P.W.;Trolier-McKinstry S.;Seung-Eek Park;Messing G.L. .Dielectric and electromechanical properties of barium titanatesingle crystals grown by templated grain growth[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2000(4):895-902. |
[21] | Shin T;Toshihiko T;Shinya I et al.Thermoelectric properties of highly textured NaCo2O4 ceramics processed by the reactive templated grain growth(RTGG) method[J].Materials Science and Engineering,2001,B86(01):20-25. |
[22] | 汪长安;黄勇;郭海.定向排布的晶须增韧陶瓷基复合材料[J].材料导报,1995(06):59-64. |
[23] | Lee JS.;Imai M.;Yano T. .Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):90-95. |
[24] | 曾宇平;江东亮;谭寿洪 等.层状Al2O3-TiC复相陶瓷的制备与性能[J].无机材料学报,1997,12(06):802-808. |
[25] | 高积强,黄清伟,仵亚红,殷晓东,金志浩.流延法制备短纤维增强玻璃陶瓷基复合材料[J].复合材料学报,1999(02):105-109. |
[26] | 李东林,王评初,罗豪甦,殷之文.67 Pb(Mg1/3Nb2/3)O3-33PbTiO3单晶90铁电畴光学研究[J].无机材料学报,2000(04):678-684. |
[27] | Seabaugh M M;Cheney G L;Hasinska K et al.Development of highly textured piezoelectric ceramics via templated grain growth[J].Ferroelectricity Newsletter,2000,8(04):2. |
[28] | 方菲;张孝文;桂治轮 等.PMN-PT系陶瓷准同型相界附近结构与介电性能研究[J].硅酸盐学报,1997,25(06):688-695. |
[29] | 夏峰,王晓莉,张良莹,姚熹.PMN-PT系陶瓷的熔盐法合成及其压电性能研究[J].硅酸盐学报,1998(01):114-117. |
[30] | Zhai Jiwei;Shen Bo;Zhang Liangying et al.Preparation and dielectric properties by sol-gel derived PMN-PT powder and ceramics[J].Materials Chemistry and Physics,2000,64:1-4. |
[31] | 张金选,杨祖培.不同制备方法对PMN-PT陶瓷相结构与显微结构及介电性能的影响[J].电子显微学报,2001(02):136-139. |
[32] | Tao Li;Suxing Wu;Ajmal Khan .Heteroepitaxial growth of bulk single-crystal Pb(Mg_1/3Nb_2/3)O_3-32 mol PbTiO_3 from (111) SrTiO_3[J].Journal of Materials Research,1999(8):3189-3191. |
[33] | Watari K;Brahmaroutu B;Gary L M et al.Epitaxial growth of anisotropically shaped,single-crystal particles of cubic SrTiO3[J].Journal of Materials Research,2000,15(04):846-849. |
[34] | 肖静,孙晓琴,刘韩星,欧阳世翕.SrTiO3制备方法探讨[J].国外建材科技,2002(03):6-8. |
[35] | 汪长安,黄勇.复合材料挤制成型过程中晶须的定向排布[J].硅酸盐通报,1999(01):48-51. |
[36] | E. M. Sabolsky;A. R. James;S. Kwon;S. Trolier-McKinstry;G. L. Messing .Piezoelectric properties of 〈001〉 textured Pb(Mg_(1/3)Nb_(2/3))O_(3)-PbTiO_(3) ceramics[J].Applied physics letters,2001(17):2551-2553. |
[37] | 黄勇,向军辉,谢志鹏,杨金龙.陶瓷材料流延成型研究现状[J].硅酸盐通报,2001(05):22-27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%