讨论了碳化硅颗粒、晶须和晶片对陶瓷材料的增韧机理,综述了这几种陶瓷复合材料的研究现状,并提出了纳米陶瓷复合材料和复合增韧陶瓷材料是该种陶瓷复合材料发展的重点.
参考文献
| [1] | 周玉.陶瓷材料学[M].哈尔滨:哈尔滨工业大学出版社,1995:263-312. |
| [2] | 沈毅,杨正方,张存满.第二相SiC颗粒弥散增韧氧化铝陶瓷的残余应力计算[J].硅酸盐通报,2003(01):68-70. |
| [3] | 申玉芳,芦令超,程新,常钧,刘福田.Al2O3基纳米复相陶瓷的研究进展[J].济南大学学报(自然科学版),2002(01):105-107. |
| [4] | 张存满,徐政,许业文.弥散SiC颗粒增韧Al2O3基陶瓷的增韧机制分析[J].硅酸盐通报,2001(05):47-50. |
| [5] | 艾红军,修稚萌,秦小梅,王际超.Al2O3/SiC纳米陶瓷复合材料的制备及力学性能[J].东北大学学报(自然科学版),2002(05):451-454. |
| [6] | 崔学民;孙康宁.内晶型结构纳米复合陶瓷研究进展[J].材料导报,2000(z10):325-327. |
| [7] | 徐利华;丁子上;黄勇 .先进复相陶瓷的研究现状和展望(Ⅲ)[J].硅酸盐通报,1997,17(02):56-59. |
| [8] | Wang Chang-an;Huang Yong .The Effect of Whisker Orientation in SiC Whisker-reinforced Si3N4 Ceramic Matrix Composites[J].Journal of the European Ceramic Society,1999(10):1903-1910. |
| [9] | Zhang Y J;Yin Y S .An initial study on SiCw- reinforced Al2TiO5 composites[J].Materials Letters,2000,46(2-3):147-148. |
| [10] | Park K;Vasilosa T .Microstructure and mechanical properties of silicon carbide whisker/calcium phosphate composites produced by hot pressing[J].Materials Letters,1997,32(04):229-233. |
| [11] | 刘玲,殷宁,亢茂青,王心葵.晶须增韧复合材料机理的研究[J].材料科学与工程,2000(02):116. |
| [12] | 邓建新;李兆前;艾兴.晶须增韧陶瓷基复合材料的进展[J].材料导报,1994(05):72-75. |
| [13] | 顾廷慰;傅永庆;潘敏元.晶须增韧陶瓷基复合材料的增韧机理及其影响因素[J].宇航材料工艺,1996(05):5-10. |
| [14] | A. Mukherjee;H. S. Rao .FE-modelling of the toughening mechanism in whisker reinforced ceramic-matrix-composites[J].Computational Materials Science,1995(3):249-262. |
| [15] | Deng J.;Ai X. .Microstructure and mechanical properties of hot-pressed TiB2-SiCw composites[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,1998(4):575-582. |
| [16] | 戴长虹,赵茹,孟永强.碳化硅纳米晶须的研究进展[J].中国陶瓷,2003(01):29-31. |
| [17] | 戴长虹,赵茹,宋祖伟,水丽.碳化硅纳米晶须的制备技术[J].材料导报,2002(12):37-39. |
| [18] | 韩伟强;范守善;李群庆 等.采用碳纳米管制备的碳化硅纳米晶须研究[J].无机材料学报,1997,12(06):774-778. |
| [19] | 顾建成,周玉,叶枫,雷廷权,吴建生.SiCpl-BAS复合材料的显微组织与力学性能[J].上海交通大学学报,2002(01):9-12. |
| [20] | KAYA C;Kaya F;Trusty P A et al.On the toughening mechanisms of SiC platelet- reinforced Al2O3/Y -TZP nano -ceramic matrix composites[J].Ceramics International,1999,25(04):359-366. |
| [21] | Kaya C.;Marsoglu M.;Kaya F. .Processing, toughness improvement and microstructural analysis of SiC platelet-reinforced Al2O3/Y-TZP nano-ceramic matrix composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):75-80. |
| [22] | H.R.Rezaie and W.E.Lee .Fabrication and mechanical properties of SiC platelet reinforced mullite matrix composites[J].Journal of the European Ceramic Society,1999(9):1777-1787. |
| [23] | Sarrafi- Nour G R;Coyle T W .Application of the weight function method to study the R- curve behavior of ceramics using chevron- notched specimens[J].Journal of the American Ceramic Society,2001,82(09):2474-2480. |
| [24] | Tao Wei;Yu Zhou;Tingquan Lei .Microstructure and Mechanical Properties of Si_3N_4 Composites Containing SiC Platelet[J].Journal of Materials Science & Technology,1998(2):151-155. |
| [25] | 董利民;田杰谟;张宝清.Si3N4/SiCp/SiCw纳米复合材料力学性能研究[J].材料导报,2000(zk):343-345. |
| [26] | Choi BJ.;Kim HE.;Koh YH. .Mechanical properties of Si3N4-SiC three-layer composite materials[J].Journal of the American Ceramic Society,1998(10):2725-2728. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%