二硼化钛(TiB2)因其优良的综合性能引起了广泛的关注.但是由于难以获得完全致密的二硼化钛陶瓷,其广泛应用受到限制.金属基体增强是改善和提高二硼化钛性能的有效途径.本文从金属体系的选择以及制备方法与致密化技术的改进简述了二硼化钛基金属陶瓷的研究进展,并提出了在二硼化钛基金属陶瓷制备过程中需要注意的一些问题.
参考文献
[1] | Matkovich V I.Boron and Refractory Borides. Matkovich V I,ed[M].New York:Springer,1977:233. |
[2] | Itoh H;Naka S;Matsudaira T et al.Preparation of TiB2 sintered compacts by hot pressing[J].Journal of Materials Science,1990,25:533-536. |
[3] | 李荣久.陶瓷-金属复合材料[M].北京:冶金工业出版社,1995 |
[4] | Pastor H.Boron and Refractory Borides[M].Berlin: Spring- Verlag,1977:457. |
[5] | Hoke D A;Meyers M A .Consolidation of combustion - synthesis titanium diboride material[J].Journal of the American Society,1995,78(02):275-284. |
[6] | 王皓;傅正义;王为民.TiB2-Ni金属陶瓷的热压烧结与性能[J].中国有色金属学报,1998(08):313-315. |
[7] | Finich C B;Becher P E;Angelini P et al.Effect of impurities on the densification of submicrometer TiB2 powders[J].Advanced Ceramic Materials,1986,1:50-54. |
[8] | 张金咏 .TiB<,2>及其金属复合材料的制备、结构与性能[D].武汉工业大学,2000. |
[9] | 向新;秦岩 .TiB2及其复合材料的研究进展[J].陶瓷学报,1999,30(02):112-117. |
[10] | 高荣根.二硼化钛基金属陶瓷的开发与应用[J].硬质合金,1998(04):235-240. |
[11] | Sanchez J.M.;Azcona I. .Mechanical properties of titanium diboride based cermets[J].Boletin de la Sociedad Espanola de Ceramica y Vidrio,2000(3):251-254. |
[12] | Gonzalez R;Barandika M G;Castro F et al.New binder phases for the consolidation of TiB2 hardmetals[J].Journal of Materials Science and Engineering,1996,A216:185-192. |
[13] | Telle R;Petzow G.Strengthening and toughening of boride and carbide hard material composites[J].Materials Science and Engineering A,1988:97-104. |
[14] | 金云学;张二林.自蔓延合成技术及原位自生复合材料[M].哈尔滨:哈尔滨工业大学出版社,2002 |
[15] | 刘建平,傅正义,王皓,张金咏,张清杰.自蔓延高温合成/快速加压法制备(TiB2+Fe)/Fe梯度材料[J].硅酸盐学报,2002(04):438-442. |
[16] | 傅正义;王为民;王皓 .TiB2系金属陶瓷SHS-SQ制备[J].硅酸盐学报,1996,24(06):654-659. |
[17] | Kecskes L J;Benck R F;Netberworel P H .Dynamic compaction of combustion- synthesized hafnium carbide[J].Journal of the American Ceramic Society,1990,73(02):383. |
[18] | 刘利 .高强高导电陶瓷金属复合材料的自蔓延高温合成及致密化研究[D].武汉工业大学,1999. |
[19] | 王为民;傅正义;袁润章 .自蔓延高温合成TiB2/NiAl复合材料的显微结构分析[J].硅酸盐学报,1996,24(04):470-475. |
[20] | Cheng TY. .MICROSTRUCTURES AND METASTABLE PHASES PRODUCED IN COLD SINTERED BLOCKS BY MECHANICAL ALLOYING OF NIAL-TIB2[J].Journal of Materials Science,1996(16):4433-4442. |
[21] | Kim WJ.;Kang ES.;Kim DK.;Kim CH.;Kim DH. .TWO-STEP SINTERING OF A TIB2NI CERMET[J].Journal of Materials Science,1996(21):5805-5809. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%