无铅压电陶瓷的开发和应用已经成为各个国家的研究热点.无铅压电陶瓷的制备方法是决定其结构、性质和应用的关键因素.本文从粉体制备方法和陶瓷制备新技术两个方面综述了近几年无铅压电陶瓷制备方法(如溶胶-凝胶法、水热法、熔盐法、压电厚膜技术、放电等离子烧结技术等)的研究进展,并对制备出的无铅压电陶瓷的性能与传统方法进行了对比,讨论了不同制备方法的优缺点.
参考文献
[1] | 国家自然基金委员会工程与材料科学部.无机非金属材料科学[M].北京:科学出版社,2006:40-62. |
[2] | 贾菲 B;林声和.压电陶瓷[M].北京:科学出版社,1979:202-205. |
[3] | Smolenskii G A;Isupov V A;Afranovskaya A I et al.New ferroelectrics of complex composition[J].Soviet Physics Solid State,1961,2(11):2651-2654. |
[4] | Takanaka T;Maruyama K I .Na0.5Bi0.5TiO3 system for lead-free piezoelectric ceramics[J].Japanese Journal of Applied Physics,1991,30(9B):2236-2239. |
[5] | 赁敦敏,肖定全,朱建国,余萍,鄢洪建.无铅压电陶瓷研究开发进展[J].压电与声光,2003(02):127-132. |
[6] | 赵明磊,王渊旭,王春雷,王矜奉,张家良,王晓颖.溶胶-凝胶法制备(Bi0.5Na0.5)1-xBaxTiO3陶瓷的性能[J].功能材料与器件学报,2004(04):413-417. |
[7] | Hou YD;Zhu MK;Hou L;Liu JB;Tang JL;Wang H;Yan H .Synthesis and characterization of lead-free K0.5Bi0.5TiO3 ferroelectrics by sol-gel technique[J].Journal of Crystal Growth,2005(3/4):500-503. |
[8] | Zhu MK;Hou L;Hou YD;Liu JB;Wang H;Yan H .Lead-free (K0.5Bi0.5)TiO3 powders and ceramics prepared by a sol-gel method[J].Materials Chemistry and Physics,2006(2/3):329-332. |
[9] | 王孝平,赁敦敏,廖运文,肖定全.无铅压电陶瓷粉体的制备和晶粒定向生长技术[J].材料导报,2005(10):16-18,22. |
[10] | 马景云,张卫珂,于方丽.溶胶-凝胶法基本原理及其在压电陶瓷中的应用[J].陶瓷,2005(08):12-14. |
[11] | Dawson W J .Hydrothermal synthesis of advanced ceramic powders[J].Ceramic Bulletin,1988,67(10):1673-1678. |
[12] | Jing XZ.;Li YX.;Yin QG. .Hydrothermal synthesis of Na0.5Bi0.5TiO3 fine powders[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2003(1/3):506-510. |
[13] | 侯磊,侯育冬,宋雪梅,朱满康,汪浩,严辉.水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体[J].无机化学学报,2006(03):563-566. |
[14] | Zeng J T;Kwok K W;Chan H L W .KxNa1 -zNbO3 powder synthesized by molten-salt process[J].Materials Letters,2007,61(02):409-411. |
[15] | 程志政 .(Na<,0.5>K<,0.5>)NbO<,3>系压电陶瓷的制备技术及其对性能的影响[D].武汉理工大学,2006. |
[16] | 李传山,沈建兴,张雷,董金美.PZT压电厚膜的研究现状与进展[J].硅酸盐通报,2006(05):103-107. |
[17] | 沈建兴;李传山;张雷.烧结工艺对PMS-PNN-PZT压电厚膜材料性能的影响[J].压电与声光 |
[18] | Duran C.;McKinstry S.T. .Fabrication and Electrical Properties of Textured Sr_(0.53)Ba_(0.47)Nb_2O_6 Ceramics by Template Grain Growth[J].Journal of the American Ceramic Society,2000(9):2203-2213. |
[19] | 曾江涛,李永祥,杨群保,殷庆瑞.压电陶瓷晶粒定向技术[J].电子元件与材料,2004(11):66-70. |
[20] | Jiangtao Zeng;Yongxiang Li;Qunbao Yang .Grain oriented CaBi_4Ti_4O_(15) piezoceramics prepared by the screen-printing multilayer grain growth technique[J].Journal of the European Ceramic Society,2005(12):2727-2730. |
[21] | K.R. Anderson;J.R. Groza .Surface oxide debonding in field assisted powder sintering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(2):278-282. |
[22] | Mamoru Omori .Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(2):183-188. |
[23] | Jing-Feng Li;Ke Wang;Bo-Ping Zhang .Ferroelectric and Piezoelectric Properties of Fine-Grained Na_(0.5)K_(0.5)NbO_3 Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering[J].Journal of the American Ceramic Society,2006(2):706-709. |
[24] | Bo-Ping Zhang;Jing-Feng Li;Ke Wang .Compositional Dependence of Piezoelectric Properties in Na_xK_(1-x)NbO_3 Lead-Free Ceramics Prepared by Spark Plasma Sintering[J].Journal of the American Ceramic Society,2006(5):1605-1609. |
[25] | Rong-Jun Xie;Yoshio Akimune;Rui-Ping Wang;Kazuo Matsuo;Tatsuo Sugiyama;Naoto Hirosaki .Spark plasma sintering of tungsten bronze Sr{sub}(2-x)Ca{sub}x NaNb{sub}5O{sub}15 (x=0.1) piezoelectric ceramics - I: processing and microstructure[J].Journal of the American Ceramic Society,2002(11):2725-2730. |
[26] | Rong-Jun Xie;Yoshio Akimune;Rui-Ping Wang;Naoto Hirosaki .Spark plasma sintering of tungsten bronze Sr{sub}(2-x)Ca{sub}xNaNb{sub}5O{sub}15 (x=0.1) piezoelectric ceramics - I: electrical properties[J].Journal of the American Ceramic Society,2002(11):2731-2737. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%