多孔陶瓷材料是一类重要的陶瓷材料,由于其特有的三维多孔结构使其具有高孔隙率、良好的化学稳定性、小体积密度及低导热性等特点,从而被广泛应用于众多领域.本文回顾了多孔陶瓷材料的几种传统制备方法,并介绍了多孔陶瓷制备工艺的新进展,同时阐述了各种制备方法的特点,指出了今后多孔陶瓷的发展趋势和发展前景.
参考文献
[1] | 朱小龙,苏雪筠.多孔陶瓷材料[J].中国陶瓷,2000(04):36-39. |
[2] | 朱新文,江东亮.有机泡沫浸渍工艺--一种经济实用的多孔陶瓷制备工艺[J].硅酸盐通报,2000(03):45-51. |
[3] | Jian-Feng Yang;Guo-Jun Zhang;Tatsuki Ohji .Fabrication of Low-Shrinkage, Porous Silicon Nitride Ceramics by Addition of a Small Amount of Carbon[J].Journal of the American Ceramic Society,2001(7):1639-1641. |
[4] | 吴建峰;徐晓红.多孔磷酸三钙生物陶瓷的研制[J].陶瓷学报,1999(02):104-107. |
[5] | 薛友祥;王耀明;贾光耀.饮用水净化高性能微孔陶瓷滤芯[J].现代技术陶瓷,1999(03):10-13. |
[6] | Wemer K;Maria S .Method of manufacturing porous sintered inorganic hodies with large open pore volume[P].US 4588540,1986-05-13. |
[7] | 龚森蔚;江东亮;谭寿洪 .孔径可控羟基磷灰石复相陶瓷中玻璃相的作用[J].材料导报,1998,12(04):31. |
[8] | Guo-Jun zhang;Jian-Feng Yang;Tatsuki Ohji .Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores[J].Journal of the American Ceramic Society,2001(6):1395-1397. |
[9] | Yang J F;Deng Z Y;Ohji T .Fabrication and characterization of porous silicon nitride ceramics using Yb2O3 as sintering additive[J].Journal of the European Ceramic Society,2003,23(02):371-378. |
[10] | Chen D Y;Zhang B L;Zhuang H R et al.Combustion synthesis of network silicon nitride porous ceramics[J].Int,2003,29(04):363-364. |
[11] | 徐振平;郭敏.一种孔径分布能控制的多孔陶瓷[J].硅酸盐通报,1996(04):49-60. |
[12] | 孙宏伟;谢灼利 .微孔α-Al2O3陶瓷膜管的制备与性能[J].无机材料学报,1998,13(05):698-702. |
[13] | Schwartzwalder K;Somess A V .Method of making porous ceramic articles[P].US 3090094,1963-05-21. |
[14] | 张勇.氮化硅泡沫陶瓷筋无包套热等静压致密化过程[J].材料工程,1998(02):30. |
[15] | Tulliani J M;Montanaro L;Bell Trevor J et al.Semiclosed-cell mullite foams:preparation and macro-and micro-mechanical characterization[J].Journal of the American Ceramic Society,1998,81(12):3349-3352. |
[16] | 赵俊亮;付涛;徐可为 .有机泡沫浸渍法制备多孔羟基磷灰石生物活性复相陶瓷[J].无机材料学报,2002,17(01):79-85. |
[17] | 吴皆正.用sol-gel法制备氧化铝多孔陶瓷的研究[J].中国陶瓷,1999(03):5. |
[18] | 奚红霞,黄仲涛.用Sol-Gel技术制备γ-Al2O3中孔膜[J].华南理工大学学报(自然科学版),1997(03):129. |
[19] | 樊栓狮;史小农;李春华 等.超细孔二氧化硅膜的制备研究[J].无机材料学报,1995,10(01):90-94. |
[20] | Malina Raileanu;Monica Popa;Jose Maria Calderon Moreno;Lia Stanciu;Lacramioara Bordeianu;Maria Zaharescu .Preparation and characterization of alumina supported silicalite membranes by sol-gel hydrothermal method[J].Journal of Membrane Science,2002(2):197-207. |
[21] | KiomuchiaY;Wataria K;Uchimurab S.Grading porou ceramics by centrifugal sintering[J].Acta Materialia,2003(51):3225-3231. |
[22] | Yongheng Zhang .Microstructures and mechanical properties of silicon nitride bonded silicon carbide ceramic foams[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2004(6):755-761. |
[23] | 梁永仁,罗艳妮,杨志懋,丁秉钧.多孔陶瓷及其制备方法研究进展[J].绝缘材料,2006(02):60-64. |
[24] | Tanev P T;Pinnavaia T J.Biomimetic templating of porous lamellar silica by vesicu larsurfactant assemblies[J].Science,1996(271):1267-1269. |
[25] | 刘培生.多孔材料引论[M].北京:清华大学出版社,2004:255. |
[26] | 夏光华,廖润华,成岳,魏恒勇,贾勇.高孔隙率多孔陶瓷滤料的制备[J].陶瓷学报,2004(01):24-27. |
[27] | Takayuki Fukasawa;Motohide Ando;Tatsuki Ohji .Synthesis of Porous Ceramics with Complex Pore Structure by Freeze-Dry Processing[J].Journal of the American Ceramic Society,2001(1):230-232. |
[28] | 杨刚宾,蔡序珩,乔冠军,金志浩.多孔陶瓷制备技术及其进展[J].河南科技大学学报(自然科学版),2004(02):99-103. |
[29] | 贾天敏;李军文;江度.过滤器净化金属液机理及含过滤器的浇铸系统设计[J].铸造,1998(05):22-26. |
[30] | 李青.汽车尾气净化用催化剂的结构与特性[J].环境保护,1998(22):5901. |
[31] | 刘辉,孙伟,覃文庆,邬顺科.多孔陶瓷材料的应用及发展前景[J].矿冶工程,2003(06):69-71. |
[32] | 牛金龙,张镇西,蒋大宗.多孔羟基磷灰石生物陶瓷的合成和特性研究进展[J].生物医学工程学杂志,2002(02):302-305. |
[33] | 陈俊彦.最新精细陶瓷技术[M].北京:中国建筑工业出版社,1986:81. |
[34] | 韩永生,李建保,魏强民.多孔陶瓷材料应用及制备的研究进展[J].材料导报,2002(03):26-29. |
[35] | Bayhan M.;Brinkman AW.;Hashemi T. .SINTERING AND HUMIDITY-SENSITIVE BEHAVIOUR OF THE ZNCR2O4-K2CRO4 CERAMIC SYSTEM[J].Journal of Materials Science,1997(24):6619-6623. |
[36] | 王卫君;王成平 .多孔陶瓷的应用[J].江苏陶瓷,1996,29(01):33-35. |
[37] | 王圣威,金宗哲,黄丽容.多孔陶瓷材料的制备及应用研究进展[J].硅酸盐通报,2006(04):124-129. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%