侧封板是薄带连铸生产线的重要组成部分，因此对侧封板材料的实际使用工况进行了简要分析，进而对侧封板材料的材质、制备工艺及使用性能进行了较详细的综述，并讨论了存在的问题和可能的发展方向，指出侧封板材料是制约国内薄带连铸技术发展的关键技术瓶颈之一，目前虽然很难找到性能优越且成本较低的侧封板材料材质，但氮化硼质复合材料依然是今后侧封板发展的主要材料之一。
The side dam is an important part of thin strip continuous casting.The actual application of side dam materials was briefly analyzed.The materials,preparation techniques,and performances of side dams were expounded.The problems and developing trends were also pointed.The side dam material is one of the key bottlenecks for thin strip continuous casting.Although it is hard to find a side dam material with both excellent properties and low cost,boron nitride composite material is one of the main developing ma-terial of side rams.
参考文献
| [1] | 刘鹏举,赵斌元,田守信,姚金甫.薄带连铸侧封技术的研究现状及发展趋势[J].耐火材料,2008(04):294-298. |
| [2] | 邸洪双.薄带连铸技术发展现状与展望[J].河南冶金,2005(01):3-7,47. |
| [3] | Jens Eichler;Christoph Lesniak .Boron nitride (BN) and BN composites for high-temperature applications[J].Journal of the European Ceramic Society,2008(5):1105-1109. |
| [4] | 张捷宇,赵顺利,樊俊飞,方园,任三兵,王波.双辊薄带连铸侧封板热应力模拟及试验研究[J].包头钢铁学院学报,2006(02):116-118. |
| [5] | 李福琴.双辊薄带连铸机的侧封[J].上海钢研,1987(04):41-49. |
| [6] | 李朝锋,邸洪双,张晓明,王国栋,刘相华.双辊铸轧薄带钢侧封板材料评价及热应力有限元模拟[J].机械工程学报,2002(11):96-99. |
| [7] | 钱跃进,任海军.含铬耐火材料的应用及前景[J].洛阳工业高等专科学校学报,2007(05):6-9. |
| [8] | 马北越,孙勇,于景坤,孙振兴.Al_2O_3-C耐火材料抗氧化性研究进展[J].腐蚀科学与防护技术,2009(06):560-562. |
| [9] | 郭贵宝,宋希文,赵文广,安胜利.添加锰粉对铝碳耐火材料抗氧化性的影响[J].包头钢铁学院学报,2004(02):118-121. |
| [10] | 郭贵宝,宋希文,赵文广,安胜利.添加锰粉对铝碳耐火材料抗侵蚀性的影响[J].包头钢铁学院学报,2003(03):216-218. |
| [11] | 田守信;陈肇友;沈添志 .含炭耐火材料中Si与SiC抑制碳氧化的机理[J].耐火材料,1995,29(01):11-15. |
| [12] | 孙勇 .添加剂对铝碳耐火材料性能的影响[D].沈阳:东北大学,2006. |
| [13] | Yoshitaka H;Shozo S .Air permeable refractory-based on alumina,zirconia,silica and graphite powder with organic fibers added[P].JP,JP2088476-A,1990-03-28. |
| [14] | Koji O;Shoji I .Alumina-zirconia-graphite refractory materials used in continuous steel casting process[P].JP,JP11246266-A,1999-09-14. |
| [15] | Hidekazu K .Continuous casting nozzle prepared by firing moulded body[P].JP,JP59162174-A,1984-09-13. |
| [16] | 田守信,刘山林,谢梦芹.添加物对MgO-ZrO2-C材料性能的影响[J].耐火材料,2000(03):154-157. |
| [17] | Ogata K;Iitsuka S .Alumina-magnesia-graphite type refractory for metallurgical use[P].WO,WO9938818-A,1999-08-05. |
| [18] | 李永全,方园,施红家,郑彬.熔融石英质侧封板的研制与使用[J].耐火材料,2005(03):229-230. |
| [19] | 邸洪双,李朝锋,刘相华,王国栋.双辊铸轧薄带钢侧封板磨损机理及热应力分析[J].东北大学学报(自然科学版),2002(07):675-678. |
| [20] | 李晓红;赵团;赵文广 .稳定氧化锆陶瓷的热膨胀系数[J].包头钢铁学院学报,1998,17(02):91-93. |
| [21] | Prakash O.;Nicholson PS.;Sarkar P. .CRACK DEFLECTION IN CERAMIC/CERAMIC LAMINATES WITH STRONG INTERFACES[J].Journal of the American Ceramic Society,1995(4):1125-1127. |
| [22] | 周泽华 .氧化锆—氧化铝层状复合陶瓷的性能研究[D].重庆大学,2002. |
| [23] | 王零森.特种陶瓷[M].长沙:中南大学出版社,2005:216-220. |
| [24] | Gafri O;Grill A;Itzhak D et al.Boron nitride coatings of steel and graphite produced with a low pressure plasma[J].THIN SOLID FILMS,1980,72(03):523-527. |
| [25] | Hiromichi O;Seijiro T .Boron nitride composite for components for steel tundish[P].JP,JP4280887-A,1992-10-06. |
| [26] | Chiyua J .Breaking ring for horizontal continuous casting[P].JP,JP8333167-A,1996-12-17. |
| [27] | Kazuo K;Masaki U .Brake ring for horizontal continuous casting ma-chine and manufacture[P].JP,JP60145963-A,1985-08-01. |
| [28] | Tomohito K;Kenji S .Refractory for continuous casting of stainless steel[P].JP,JP62072568-A,1987-04-03. |
| [29] | Chiyua J .Side dam plate for continuous casting of steel[P].JP,JP8164452-A,1996-06-25. |
| [30] | Chiyokatsu H;Tomoharu S .Water-cooling mould for continuously casting steel melt[P].JP,JP4111949-A,1992-04-13. |
| [31] | Nose;Tetsuro;Akeuchi .Ceramic plate as side weir for twin drum type thin-sheet continuous casting[P].US,US0166808-A1,2006-07-27. |
| [32] | Sigl L;Thaler H .Reaction sintered composites and shaped bodies containing boron nitride and method of making them[P].EP,EP519492-A,1992-12-23. |
| [33] | Amadeh A;Labbe J C;Quintard P E .Wettability and corrosion of AlN-BN-C ceramics by a SiCa treated liquid steel[J].Corrosion Science,2004,46(01):183-191. |
| [34] | Kres'an J;Pritula O;Smrcok L' et al.Corrosion ofβ-Sialon-based ceramics by molten steel[J].Journal of the European Ceramic Society,2007,27(05):2137-2143. |
| [35] | 包宏,甄强,李文超.O'-Sialon/BN和O'-Sialon/ZrO2复合材料抗熔融金属和保护渣侵蚀[J].北京科技大学学报,2001(04):311-315. |
| [36] | Guillo P;Hoggard D B;Hoggard D .Composite material[P].WO,WO200030996-A,2003-12-23. |
| [37] | Guillo P;Hoggard D B .Composite material for the manufacture of refractory piece,side dam plates for strip casting process[P].EP,EP1002776-A,2000-05-24. |
| [38] | Guillo P;Hoggard D B;Hoggard D .Composite pressure-sintered ma-terial for making refractory pieces in steel industry[P].US,US6667263-B1,2003-12-23. |
| [39] | Hiroaki N .Aluminium nitride-boron nitride based refractory[P].JP,JP11255562-A,1999-09-21. |
| [40] | Krolikowski C R;Krolikowski C .Articles for casting applications compring ceramic composite and methods for making articles there-of[P].WO,WO2003061875-A,2003-07-31. |
| [41] | Montgomery L C .Ceramic composite and method for casting molten stainless steel[P].EP,EP616988-A,1994-09-28. |
| [42] | Ryabov V A;Lokotnikova I V;Sharova T V .Composite refractories for continuously casting steel[P].SU,SU1794073-A3,1993-07-02. |
| [43] | Sindlhause P;Hunold K;Lipp A et al.Pressure sintered polycrystal-line mixed materials with a base of hexagonal boron nitride,oxide and carbides[P].DE,DE3824849-A1,1990-01-25. |
| [44] | P. Fournier;F. Platon .Wear of refractory ceramics against nickel[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(1/2):118-125. |
| [45] | Amadeh A A;Labbe J C;Quintard P E .Behaviour of the wettability of a SiAlON-base ceramic by molten steel[J].Journal of the European Ceramic Society,2005,25(07):1041-1048. |
| [46] | 韩波 .矾士基β-SiAlON-Al2 O3-SiC复合材料制备、性能及显微结构的研究[D].郑州:郑州大学,2006. |
| [47] | A. Amadeh;S. Heshmati-Manesh;J.C. Labbe .Wettability and corrosion of TiN, TiN-BN and TiN-AlN by liquid steel[J].Journal of the European Ceramic Society,2001(3):277-282. |
| [48] | Amadeh A;Labbe J C;Lameche A et al.Influence of boron nitride and carbon additives on the behavior of sintered AlN in a steel-mak-ing environment[J].Journal of the European Ceramic Society,1996,16(04):403-408. |
| [49] | Abreal A;Goeuriot D;Thevenot F et al.Effect of Y2 O3 addition on alumina-hex boron nitride composites[J].Journal of the European Ceramic Society,1995,15(09):841-849. |
| [50] | Guo-Jun Zhang;Motohide Ando;Tatsuki Ohji .High-Performance Boron Nitride-Containing Composites by Reaction Synthesis for the Applications in the Steel Industry[J].International journal of applied ceramic technology,2005(2):162-171. |
| [51] | 李永全;方园;李泽亚 .一种铝锆碳-氮化硼复合侧封板及其制造方法[P].中国,CN1589991-A,2005-03-09. |
| [52] | 李永全;方园 .一种高温陶瓷耐火材料及其制造方法[P].中国,CN1470473-A,2004-01-28. |
| [53] | Boey F Y C;Song X L;Gu Z Y et al.AlON phase formation in a tape-cast Al2 O3/AlN composite[J].Journal of Materials Processing Technology,1999,89-90:478-480. |
| [54] | P.L.Wang;W.Y.Sun .Formation and densification of 21R AlN-polytypoid[J].Journal of the European Ceramic Society,2000(1):23-27. |
| [55] | 李永全,方园.氮化硼氧化锆复合材料的热压烧结[J].上海金属,2005(03):6-8. |
| [56] | 王玉金,崔磊,贾德昌,周玉.反应热压烧结BN-ZrB_2-ZrO_2复合材料的显微组织与力学性能[J].稀有金属材料与工程,2009(z2):470-474. |
| [57] | Spink J A .Continuous casting of steel strip,involves introducing molten steel between casting rolls to form casting pool which is con-fined by side closures made of mixture of graphite,refractory aggre-gate,aluminum/alloy[P].US,US6257315-B1,2001-07-10. |
| [58] | 田守信;叶长宏;姚金甫 等.双辊薄带连铸侧封板及其制作方法[P].中国,CN101648260-A,2010-02-17. |
| [59] | 庞克昌 .薄带连铸装置[P].中国,CN91107479.1,1993-03-10. |
| [60] | 章仲禹;徐祖华;龚荣光 .双辊连铸机电热侧封装置[P].中国,CN2346526-Y,1999-11-03. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%