通过利用磁控溅射离子镀技术制备CrTiAlN梯度涂层M2高速钢麻花钻,对镀层进行了组织、结构分析,并在干式切削条件下对普通45#钢和30CrMnSiA高强度钢进行了钻削试验.由于CrTiAlN涂层本身具有良好的热氧化性能和良好的组织结构,M2高速钢刀具经CrTiAlN涂层后,在干式切削条件下钻削45#钢和30CrMnSiA高强度钢时,钻头寿命比未涂层提高约19倍和15.2倍.
参考文献
| [1] | K. J. A. Brookes .Coatings and material advances continue to drive cutting tools[J].Metal Powder Report,1998(7/8):28-30. |
| [2] | F. Klocke;T. Krieg;K. Gerschwiler;R. Fritsch;V. Zinkann;M. Pohls;G. Eisenblatter .Improved cutting processes with adapted coating systems[J].CIRP Annals,1998(1):65-68. |
| [3] | Klocke F;Krieg T .Coated Tools for Metal Cutting - Features and Application[J].Annals of the CIRP,1999,48:515-525. |
| [4] | Randaw A H;Johnson P C.Technical note:A review of cathodic arc plasm a deposition and there application[J].Surface and Coatings Technology,1987:303-318. |
| [5] | 林有希;高诚辉;唐旭晟.切削刀具PVD涂层技术的研究与发展[J].机电技术,2003(01):88-92. |
| [6] | 邸英浩,曹晓明.真空镀膜技术的现状及进展[J].天津冶金,2004(05):45-48. |
| [7] | 董骐,范毓殿.非平衡磁控溅射及其应用[J].真空科学与技术,1996(01):51-57. |
| [8] | Kelly P J;Arnell R D;Ahmed W et al.Novel engineering coatings produced by close-filed unbalanced magnetron sputtering[J].Materials & Design,2003,17:215-219. |
| [9] | Matchews A .Containing chromium coatings prepared by reactive magnetron sputtering[J].Surface and Coatings Technology,1999,115:222-229. |
| [10] | Benien H;Maushart J;Meyer M et al.magnetron sputtering of oxidation-resistant chromium and CrN films monitored ptical emission spectrometry[J].Materials Science and Engineering,1991,AI 39:126-131. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%