用电化学的方法研究了高频脉冲电镀Ni-Co复合镀层在NaCl溶液中的耐蚀性,结果表明:随着频率的增加,沉积速率提高,沉积层表面更加致密、均匀,在3.5%NaCl溶液中Ni-Co镀层的腐蚀失重明显减小,腐蚀失重速率变慢;高频和直流电铸Ni-Co复合镀层的阳极极化曲线形状相似,随频率增加,自腐蚀电位正移,自腐蚀电流降低.可见,高频率对沉积层的细化有重要影响,并使镀层的耐蚀性提高.
参考文献
| [1] | Frederick A L;北京航空学院103教研室.现代电镀[M].北京:机械工业出版社,1982:189-190. |
| [2] | Fenineche N;Coddet C;Saida A .Effect of electrodeposition parameters on the microstructure and mechanical properties of Co-Ni alloys[J].Surface and Coatings Technology,1990,41(01):75-81. |
| [3] | Zhu H;Yang S G;Ni G et al.Fabrication and magnetic properties of Co67Ni33 alloy nanowire array[J].Scripta Materialia,2001,44(8-9):2291. |
| [4] | Carlos A. Moina;Mario Vazdar .Electrodeposition of nano-sized nuclei of magnetic Co-Ni alloys onto n-Si (100)[J].Electrochemistry communications,2001(4):159-163. |
| [5] | 向国朴.脉冲电镀发展概况[J].电镀与涂饰,2000(04):43-47. |
| [6] | 王鸿建.电镀工艺学[M].哈尔滨:哈尔滨工业大学出版社,1995:23-24. |
| [7] | C. N. Panagopoulos;V. D. Papachristos;L. W. Christoffersen .Lubricated sliding wear behaviour of Ni-P-W multilayered alloy coatings produced by pulse plating[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2000(1/2):155-163. |
| [8] | 韩苗兴,何永夫.电镀用脉冲电源的应用推广[J].表面技术,2002(05):64-66. |
| [9] | 王伊卿,赵文轸,唐一平,卢秉恒.Ni-Co合金电铸工艺及性能研究[J].兵器材料科学与工程,2000(03):39-43,56. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%