欢迎登录材料期刊网

材料期刊网

高级检索

为了解决颗粒增强铜基复合材料中颗粒与铜基体相容性的问题,采用化学镀法使得颗粒表面金属化,通过XRD、SEM、EDS等技术研究了Al2O3纳米粉化学镀铜的工艺,并对Cu/Al2O3复合粉体的烧结行为做了初步探讨.结果表明:Al2O3粉前处理工艺、镀液的各种成分都对粉体表面铜的含量有影响,通过改变装载量可有效控制粉体表面Cu含量.实验中确定了最佳的镀覆工艺,并得到了颗粒较为弥散的Cu/Al2O3复合粉体烧结体.

参考文献

[1] 丁红燕,符学龙,戴起勋,周广宏,章跃.粉末冶金法制备Cu/Al2O3复合材料及其性能研究[J].金属热处理,2007(06):37-40.
[2] 刘远廷,凌国平.纳米Al2O3化学镀铜粉杂质对烧结致密化的影响[J].材料科学与工艺,2005(05):524-527.
[3] Puclin T.;Kaczmarek WA. .Synthesis of alumina-nitride nanocomposites by successive reduction-nitridation in mechanochemically activated reactions[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1998(1/2):283-292.
[4] Hae JinHwang;Motohiro Toriyama;Tohru Sekino et al.In-situ fab-rication of ceramic/metal nanocomposites by reduction reaction in barium titanate-metal oxide systems[J].Journal of the European Ceramic Society,1998,18(14):2 193-2 199.
[5] Oh IH;Lee JY;Han JK;Lee HJ;Lee BT .Microstructural characterization of Al2O3-Ni composites prepared by electroless deposition[J].Surface & Coatings Technology,2005(1):39-42.
[6] Shi GM;Han JK;Zhang ZD;Song HY;Lee BT .Pretreatment effect on the synthesis of Ag-coated Al2O3 powders by electroless deposition process[J].Surface & Coatings Technology,2005(2/3):333-337.
[7] 黎德育,李宁,李柏松.粉体上的化学镀镍[J].材料科学与工艺,2003(04):414-418.
[8] 段志伟,张振忠,陆春华,沈晓冬.化学镀法制备Cu包覆纳米Al2O3粉体[J].表面技术,2006(03):11-13,35.
[9] Silvain J F;Bobet J L .Electroless deposition of copper onto lumina sub-micronic powders and sintering[J].Composites,2002,33:1 387-1 390.
[10] 果世驹.粉末烧结理论[M].北京:冶金工业出版社,1998:3.
[11] Heckel R W .An analysis of powder compaction phenomena[J].Trans AIME,1961,221:1 001-1 008.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%