为找寻一种合适的轧机牌坊表面修复方法,根据实际工况,对几种激光熔覆涂层在150℃水蒸气环境中的抗氧化性能及抗磨损性能进行了测试分析,测试结果表明,制备的钴基涂层具有优异的抗水蒸气氧化性能和抗摩擦磨损性能.选用该钴基材料在牌坊模拟件上模拟现场施工状况进行了激光熔覆,同时监测了熔覆过程中的动态应力演变.监测结果表明,应力演变最大值并未超过基体铸钢的屈服强度,这种大面积激光熔覆不会引起结构的宏观变形,表明激光熔覆方法是一种适用于轧机牌坊大面积表面修复的方法.
In order to seek a appropriate restoring method for the rolling-mill housing surfaces, the oxidation resistance in 150℃ vapor circumstance and the abrasion resistance of several laser cladding layers were investigated. The results show that Co-based layer has excellent oxidation resistance and abrasion resistance. Then this Co-based laser cladding layer has been applied to the simulator of rolling-mill housing. The development of the welding stress on the cladding process has also been monitored. The results show that the maximum value of the welding dynamic stress is lower than the yield stress of base material, and will not cause the deformation of the whole structure. Laser cladding method is a suitable way to restore the rolling-mill housing surfaces.
参考文献
| [1] | 罗喜泽.层叠堆焊法在大型零件修复上的应用[J].钢管,2004(04):47-50. |
| [2] | 宗培,曾宏军,彭飞.焊接过程对焊接残余应力及残余变形的影响[J].海军工程大学学报,2002(04):77-80. |
| [3] | 姜伟,胡芳友,戴京涛.CO2激光熔覆修复涡轮导向器工艺初探[J].表面技术,2008(02):56-58. |
| [4] | 王树保,陈国喜,陈红辉,袁巨.轧机主传动叉头激光熔覆性能研究[J].焊接,2008(09):50-53. |
| [5] | 董刚,白万金,张九渊,任不凡,徐伟福.激光熔覆Ni基合金/SiC涂层耐冲蚀性能的研究[J].表面技术,2004(02):36-37,42. |
| [6] | 郭立峰,魏彦筱,张晓昱,郝晓军.18-8奥氏体不锈钢水蒸汽氧化的失效分析[J].华北电力技术,2005(08):21-23. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%