对两种硅钢水溶性极厚绝缘涂层进行了不同温度的热老化实验.通过TG-DTA,GDS,FT-IR,SEM和光泽度仪等测试方法对老化的涂层进行分析表征,提出了评估硅钢水溶性极厚绝缘涂层热老化性能的合理温度区间,探讨了涂层热老化行为,并分析了两种涂层热老化性能的差异.结果表明,涂层附着性随着老化时间的延长逐渐下降.FT-IR表征结果显示,热老化过程中,涂料交联形成的化学键未发生断裂,交联剂氨基树脂的三嗪环被破坏是聚合物三维网络结构坍塌的主要原因.
参考文献
| [1] | ASTM A976-2003.Standard Classification of Insulating Coatings for Electrical Steels by Composition,Relative,nsulating Ability and Application[S]. |
| [2] | KIM Jung-woo .Coating Solution for Non-oriented Elec trical Steel Sheet.Method of Coating Non-oriented Electrical Steel Sheet Using the Same,and Coating Film of Non-oriented Electrical Steel Sheet[P].KR,084777,2009-07-09. |
| [3] | 吴树建,孙宝德,王俊,储双杰,陈晓.新型无取向硅钢绝缘涂层附着性评定方法[J].理化检验-物理分册,2007(11):545-547. |
| [4] | DOYLE C D .Estimating Thermal Stability of Experi mental Polymers by Empirical Thermo Gravimetric Analysis[J].Analytical Chemistry,1961,33:77. |
| [5] | WOGNSIEDLER H P;ACS Div Org .Radiation Degradation of MG Rubber Studied by Dynamic Mechanical A nalysis and Solid State NMR[J].Coatings and plastics chem,1960,20(02):53-57. |
| [6] | HUCHAND D S;COOPER S L .Dynamic Mechanical Properties of Polyurethane Elastomers[J].Plomer Eng Sic,1971,11(05):432-443. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%