对国内外TRIP钢热镀锌可镀性研究的最新进展进行了介绍,分析了基板成分、退火工艺、热镀锌工艺对TRIP钢热镀锌可镀性的影响,同时阐述了改善TRIP钢可镀性的对策措施.最后指出,采用预氧化还原热镀锌工艺生产含硅TRIP钢,是未来TRIP钢热镀锌工业生产的主流方向.
参考文献
| [1] | S. Turteltaub;A.S.J. Suiker .Transformation-induced plasticity in ferrous alloys[J].Journal of the Mechanics and Physics of Solids,2005(8):1747-1788. |
| [2] | A. Wasilkowska;P. Tsipouridis;E.A. Werner .Microstructure and tensile behaviour of cold-rolled TRIP-aided steels[J].Journal of Materials Processing Technology,2004(0):633-636. |
| [3] | SALEH M H .Priesnter Retained Austenite in Dual Phase Silicon Steels and Its Effect on Mechanical Properties[J].Journal of Materials Processing Technology,2001,113(1/2/3):587-593. |
| [4] | LI Y X;LIN Z Q;AI Q J et al.Use of High Strength Steel Sheet for Light weight and Crash Worthy Car Body[J].Materials & Design,2003,24(03):177-188. |
| [5] | K.Eberle;P.Cantinieaux .New thermomechanical strategy for production of high strength low alloyed multiphase steel showing transformation induced plasticity effect[J].Ironmaking & Steelmaking: Products and applications,1999(3):176-181. |
| [6] | Marder AR. .The metallurgy of zinc-coated steel [Review][J].Progress in materials science,2000(3):191-271. |
| [7] | 邸洪双,蒋光炜,鲍成人,潘恩宝.高强钢板热镀锌工艺研究现状[J].河南冶金,2009(01):1-5. |
| [8] | 刘仁东,惠兴伟,赵欣.汽车用钢的研发与应用--"2009年汽车用钢生产及应用技术国际研讨会"综述[J].中国冶金,2009(10):47-48. |
| [9] | WANG L;JIN X Y;QIAN H W.Recent Development of Galvanizing in Baosteel[A].Genova,Italy:AIM,2011 |
| [10] | KIM M S;KIM Y H;LEE J Y.Effect of Aluminum on Galvanizability of TRIP-Assisted Steels[A].Genova,Italy:AIM,2011 |
| [11] | J. Mahieu;B.C. De Cooman;J. Maki .Hot-Dip Galvanizing of Al Alloyed TRIP Steels[J].Iron & Steelmaker,2002(6):29-34. |
| [12] | HERVELDT I;CRAENEN J;DECOOMAN B C.Structure of the Inhibition Layer after Hot Dip Galvanizing of Ti IF-DDQ,TiNb IF-DDQ and TiNb+P IF-HSS Subtrates[A].San Antoio,Texas,USA:Minerals,Metals & Materials Soc (TMS),1998:13-25. |
| [13] | SONG G M;SLOOF W G;VYSTAVE T et al.Interface Microstructure and Adhesion of Coating on TRIP Steels[J].Materials Science Forum,2007,539/540/541/542/543:1104-1109. |
| [14] | MAHIEU J;CLAESSENS S;DECOOMAN B C.Surface and Sub-surface Characterization of Si-,Al-and P-alloyed TRIP-Aided Steel[A].ISS,Chicago,USA:AIST,2004:529-538. |
| [15] | BODE R;MEURER M;SCHAUMANN T W.Selection and Use of Coated Advanced High-strength Steels for Automotive Applications[A].ISS,Chicago,USA:AIST,2004:107-118. |
| [16] | 崔青玲,李建平,张晓明.先进高强钢板可镀性及内氧化模型研究进展[J].轧钢,2011(03):43-46,53. |
| [17] | EYNDE X V;SERVAIS J P;LAMBERIGTS M.Surface Oxide Maturation and Self-reduction:a New Process to Ensure TRIP Steel Hot Dip Galvanizing[A].ISS,Chicago,USA:AIST,2004:361-372. |
| [18] | ZAEFEROR S;OHLERT J;BLECK W .A Study of Microstructure Transformation Mechanisms and Correlation between Microstructure and Mechanical Properties of a Low Alloyed TRIP Steel[J].Act a Material,2004,52:2765-2768. |
| [19] | Lin LI,B.C.De Cooman,P.Wollants,Yanlin HE,Xiaodong ZHOU.Effect of Aluminum and Silicon on Transformation Induced Plasticity of the TRIP Steel[J].材料科学技术学报(英文版),2004(02):135-138. |
| [20] | K. SUGIMOTO;B. Yu;Y. MUKAI .Microstructure and formability of aluminum bearing TRIP-aided steels with annealed martensite matrix[J].ISIJ International,2005(8):1194-1200. |
| [21] | BHATTACHARYA D.Perspectives on Coated Advanced High Strength Steels for Automotive Applications[A].Genova,Italy:AIM,2011 |
| [22] | NORDEN M;BLUMENAU M;SCHONENBERG R.Chance and Challenges of Using Preoxidation in Hot Dip Galvanizing of AHSS[A].Genova,Italy:AIM,2011 |
| [23] | Norden M.Thesis,RWTH Aachen,ISBN978-3-8322-9652-0.Aachen,2010.(余不详[Z]. |
| [24] | E.M. Bellhouse;A.I.M. Mertens;J.R. McDermid .Development of the surface structure of TRIP steels prior to hot-dip galvanizing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):147-156. |
| [25] | LEE S J;LEE Y;GOODWIN F E.Galvanizing and Galvannealing of A 800 MPa TRIP Steel Grade[A].Genova,Italy:AIM,2011 |
| [26] | STAUDTE J.Galvanizability of High Mn Grades Versus Mixed Mn-Al and Mn-Si Grades[A].Genova,Italy:AIM,2011 |
| [27] | CHO L;KIM M S;KIM Y H.Observation of the Transition of External to Internal Oxidation due to Dew Point Control[A].Genova,Italy:AIM,2011 |
| [28] | GAO N;LIU D Y H;PARK R.Optimizing Bath Al Level for Improved Galvanizability of Advanced High Strength Steels[A].Genova,Italy:AIM,2011 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%