采用大气等离子喷涂技术制备了CoCrAl-B4C涂层,测试了涂层的硬度、结合强度、热震性能及不同条件下的摩擦系数.结果表明:涂层的平均显微硬度为980HV0.2,平均结合强度为17.5 MPa,经900℃水淬热震循环10次仍然完好；涂层经700℃热处理后,摩擦系数较低且波动小,水蒸气的存在有利于涂层摩擦系数的降低,其主要原因是涂层表面在热处理与摩擦过程中生成了B2O3和H3BO3自润滑相.
参考文献
| [1] | O. Conde;A. J. Silvestre;J. C. Oliveira .Influence of carbon content on the crystallographic structure of boron carbide films[J].Surface & Coatings Technology,2000(1/3):141-146. |
| [2] | THEVENOT Francois .Boron Carbide--a Comprehensive Review[J].Journal of the European Ceramic Society,1990,6:205-225. |
| [3] | S. J. Harris;G. G. Krauss;S. J. Simko;R. J. Baird;S. A. Gebremariam;G. Doll .Abrasion and chemical-mechanical polishing between steel and a sputtered boron carbide coating[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2002(1/2):161-169. |
| [4] | A. A. Grossman;R. P. Doerner;S. Luckhardt;R. Seraydarian;A. K. Burnham .Transport properties of hydrogen isotopes in boron carbide structures[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,1999(0):819-824. |
| [5] | D. C. Reigada;R. Prioli;L. G. Jacobsohn;F. L. Freire Jr. .Boron carbide films deposited by a magnetron sputter-ion plating process: film composition and tribological properties[J].Diamond and Related Materials,2000(3-6):489-493. |
| [6] | Terry Hu;Lynn Steihl;William Rafaniello;Timothy Fawcett;David D. Hawn;Joan G. Mashall;Steve J. Rozeveld .Structures and properties of disordered boron carbide coatings generated by magnetron sputtering[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1998(1/2):80-86. |
| [7] | Hai Ying Chen;Jing Wang;Hai Yang;Wen Zhi Li;Heng De Li .Synthesis of boron carbide films by ion beam sputtering[J].Surface & Coatings Technology,2000(0):329-333. |
| [8] | ERDEMIR A;BINDAL C;FENSKE G R .Formation of Ultralow Friction Surface Films on Boron Carbide[J].Applied Physics Letters,1996,68(12):1637-1639. |
| [9] | GOGOTSI Yu G;KOVAL CHENKO A M;KOSSKO IA .Tribochemical Interactions of Boron Carbides Against Steel[J].Wear,1992,154(01):133-140. |
| [10] | O.I. Buzhinskij;Yu.M. Semenets .Thick boron carbide coatings for protection of tokamak first wall and divertor[J].Fusion engineering and design,1999(4):343-360. |
| [11] | FUENTES C;BLAUMOSER M;BOTIJ A J et al.Development and Tests of B4C Covered Heat Shields for TJ-Ⅱ[J].Fusion Engineering and Design,2001,56/57:315-319. |
| [12] | Ozkan Sarikaya;Selahaddin Anik;Erdal Celik .Wear behaviour of plasma-sprayed AlSi/B_4C composite coatings[J].Materials & Design,2007(7):2177-2183. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%