采用阳极氧化与热氧化相结合的复合氧化方法对医用钛合金进行氧化处理,研究了溶液组成及后处理工艺对表面形貌及耐蚀性的影响.采用扫描电子显微镜对膜层进行了形貌分析,并对氧化处理前后样品的耐磨性和耐蚀性进行了测试分析.试验结果表明,复合处理工艺大大提高了医用钛合金的耐蚀性和耐磨性.
参考文献
| [1] | Mueller Hj;Giuseppetti A A;Waterstratt R M .Phosphate-bonded investment materials for titanium casting[J].Journal of Dental Research,1990,69:367. |
| [2] | Li Jianguo .Behaviour of titanium and titania-based ceramics in vitro and in vivo[J].Biomaterials,1993,14(03):229-232. |
| [3] | Wisbey A;Gregson P J;Peter L M .Effect of surface treatment on the dissolution of titanium-based implant materials[J].Biomaterials,1991,12(05):470-473. |
| [4] | Sundgren J E;Bodo P;Lundstrom I .Auger electron spectroscopic studies of the interface between human tissue and implants of titanium and stainless steel[J].Journal of Colloid and Interface Science,1986,110(02):470-473. |
| [5] | 戴正宏,王玉林,何宝明.钛阳极氧化膜的着色研究[J].材料保护,2004(03):25-27. |
| [6] | 张永德.钛的着色工艺原理及其应用[J].表面技术,2001(02):33-34,43. |
| [7] | 糜丹青.钛的着色[J].钛工业进展,1997(05):16-18. |
| [8] | 邓姝皓,龚竹青,柳勇.不锈钢着银灰色的技术研究[J].电镀与涂饰,2003(02):11-14. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%