介绍了目前国内外不锈钢彩色化工艺的研究现状和着色方法,分析了化学着色法和电化学着色方法的机理,并列举了一些具有代表性的研究实例,讨论了各工艺配方的特点,提出了不含铬的配方是当今不锈钢彩色化的一种发展趋势.
参考文献
[1] | 周元康;王满力;罗述杰 .不锈钢着色的色泽控制[J].材料保护,1997,30(11):20-21. |
[2] | Evans T E .The mechanism of the colored film on stainless steels[J].Corrosion Science,1977,17:105-109. |
[3] | 周细应.不锈钢化学着色工艺探讨[J].材料保护,1995(11):14. |
[4] | 张颖;陶珍东;马艳芳 等.不锈钢着色研究[J].腐蚀与防护,1998,19(04):175-177. |
[5] | 倪小平.不锈钢着黑色工艺[J].电镀与精饰,2000(05):31-32. |
[6] | 贾法龙,郭稚弧.不锈钢着色法研究的新进展[J].腐蚀与防护,2002(06):249-253. |
[7] | 郭稚弧,王海人,贾法龙.不锈钢着色新技术的研究[J].材料保护,2000(05):32-34. |
[8] | 廖小珍 .交流方波电解法制备彩色不锈钢[J].电镀与涂饰,1995,14(03):19-21. |
[9] | 郭稚弧;贾法龙;邱于兵 .三角波扫描电流法制备彩色不锈钢的研究[J].电镀与环保,2000,20(04):21-25. |
[10] | 李瑜煜,谢致微,黎樵燊,张文雄.不锈钢阳极氧化着金黄色技术的研究[J].材料保护,1999(09):12-14. |
[11] | Jun J N;Oh S C .A study on the development of coloring stainless steel (electrolytic method)[J].Yongu Pogo-Kungnip Kisulwon (Korean),1993,4(03):85-98. |
[12] | 宋光玲;曹楚南;林海潮 等.载波钝化及其后处理对不锈钢钝化膜组成和稳定性的影响[J].中国腐蚀与防护学报,1992,12(02):13-14. |
[13] | Lin C J;Duh J G .Mechanical chracteristics of colored film on stainless steel by the current pulse method[J].Thin Solid Films,1996,287:80-86. |
[14] | Lin C J;Duh J G .The predominant operation and alternative controllability in the square-wave current pulse process for coloring SUS 304 stainless steel[J].Surface and Coatings Technology,1994,70:79-85. |
[15] | Ogura K;Sakurai K;Uehara S .Room temperature coloration of stainless steel by alternating potential pulse method[J].Journal of the Electrochemical Society,1994,141(03):648-651. |
[16] | Sakurai Kazuo;Ogura Kotaro .Chemical coloration method of stainless steel[P].JP 07252688,1995-10-03. |
[17] | Seto Katsumi;Takatsu Kiyoshi;Takahashi Kazuhiko .Stainless steel for coloring method of stainless steel[P].JP 07252690,1995-10-03. |
[18] | Ogura K;Tsujigo M;Sakurai K .Electrochemical coloration of stainless steel and the scanningtunneling microscopic study[J].J Electrochem Sco,1993,140(05):1311-1315. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%