以NaH2PO2·H2O和FeCl2·4H2O为主要组分,依次加入导电盐、pH缓冲剂、抗氧化剂和其他添加剂配制成镀液电镀铁-磷合金镀层;结合镀层的硬度和显微形貌的分析,研究了pH、温度和电流密度对镀层外观质量的影响.发现电镀Fe-P合金的最佳工艺参数是pH为1.0,Jk为26A/dm2,温度为43℃.
参考文献
| [1] | Vitkova S T;Kjuchukova M;Raichevski G .Electrochemical preparation of amorphous Fe-P alloys[J].Journal of Applied Electrochemistry,1988,18:673-678. |
| [2] | 张远声;龚敏;唐贤臣.Fe-P非晶态合金电镀层性能研究[J].腐蚀与防护,1998(03):3-5. |
| [3] | 张远声,龚敏,凌厉为.非晶态Fe-P合金电镀液稳定性研究[J].电镀与精饰,1999(01):10-12. |
| [4] | Wang L;Zhao L;Huang G;et al.Zhang B .The structure and crystallization of amorphous Ni-Fe-P-B alloys prepared by electroless plating[J].Materials Research and Advanced Techniques,2001,11:391-395. |
| [5] | Kamei K.;Maehara Y. .MAGNETIC PROPERTIES AND MICROSTRUCTURE OF ELECTRODEPOSITED FE-P AMORPHOUS ALLOY[J].Journal of Applied Electrochemistry,1996(5):529-535. |
| [6] | A. Miko;R. Hempelmann;M. Lakatos-Varsanyi .Iron-Phosphorous Layers Deposited by Pulse Electrochemical Technique[J].Electrochemical and solid-state letters,2006(8):C126-C130. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%