铝合金材料在加工和使用前需要对其进行预处理,其中表面氧化膜的去除是一个重要的环节.综述了近年来国内外关于铝合金表面氧化膜去除方法的研究进展,主要包括物理方法、化学方法和电化学法,并对这些方法的去除机理以及局限性进行了阐述,以期为寻找出一种能够不影响铝合金各项性能而同时高效去除氧化膜的方法提供帮助和指导,并对未来的发展方向做出了展望.
参考文献
| [1] | 陈奇芳.铝合金在建筑结构工程中的应用[J].中国新技术新产品,2010(24):112-113. |
| [2] | 武仲河,战中学,孙全喜,黄瑞芬.铝合金在汽车工业中的应用与发展前景[J].内蒙古科技与经济,2008(09):59-60. |
| [3] | T.R. Ramachandran;P.K. Sharma;K. Balasubramanian .ALUMINIUM FOR AUTOMOTIVE APPLICATIONS[J].Transactions of the Indian Institute of Metals,2004(4):409-425. |
| [4] | 李志明.铝合金电缆在住宅配电系统节能中的应用[J].硅谷,2011(19):154-154. |
| [5] | 张钰.铝合金在航天航空中的应用[J].铝加工,2009(03):50-53. |
| [6] | Vasilescu M .Elaboration and Casting of some Al-Li Based Alloys used in Aerospace Industry[J].Metalurgia International,2009,14(08):19-22. |
| [7] | 晏辉.石材打磨抛光技术介绍（一）[J].石材,2004(05):19-23. |
| [8] | 晏辉.石材打磨抛光技术介绍（二）[J].石材,2004(06):15-21. |
| [9] | 吴春山.用机加工法去除镀层和氧化膜[J].林业机械,1993(02):41-42. |
| [10] | Mansour Mhaede .Influence of surface treatments on surface layer properties, fatigue and corrosion fatigue performance of AA7075 T73[J].Materials & design,2012(Oct.):61-66. |
| [11] | Mouna Baklouti;Ridha Mnif;Riadh Elleuch .Impact of surface hardening treatment generated by shot peening on the fatigue life of brass alloy[J].Journal of Mechanical Science and Technology,2012(9):2711-2717. |
| [12] | Takehiko Watanabe;Hirofumi Takayama;Atsushi Yanagisawa .Joining of aluminum alloy to steel by friction stir welding[J].Journal of Materials Processing Technology,2006(1/3):342-349. |
| [13] | 苏光,杜伟.超声波及钎料成分对氧化铝/铜钎焊效果的影响[J].热加工工艺,2011(07):154-155,158. |
| [14] | 赵如龙,孙勇,段永华,鲁俐,殷国祥.机械振动法制备Al/Sn复合材料[J].材料热处理学报,2009(04):10-13. |
| [15] | 余克壮,彭勃,范民,许志武,闫久春.LF6铝合金散热器振动钎焊润湿界面微观组织特征[J].机械制造文摘-焊接分册,2011(03):28-31,43. |
| [16] | Xu Z W;Ma L;Yan J C et al.Wetting and oxidation during ultrasonic soldering of an alumina reinforced aluminum-copper-magnesium (2024 Al) matrix composite[J].Composites part A-Applied science and manufactruing,2011,43(03):407-414. |
| [17] | Hisashi IMAI;Shin-ichi MATSUOKA .Finding the Optimum Parameters for Ultrasonic Welding of Aluminum Alloys[J].JSME International Journal, Series A. Solid mechanics and material engineering,2005(4):311-316. |
| [18] | 北京航空学院.铝合金中温钎焊[J].机械工人热加工技术,1978(07):8-10. |
| [19] | 刘伟华,左禹,赵旭辉.LY12铝合金阳极氧化膜受热后的开裂及其对腐蚀电化学行为的影响[J].科技导报,2008(08):63-66. |
| [20] | 曾晓雁;吴懿平.表面工程学[M].北京:机械工业出版社,2001:164. |
| [21] | KwangSup Eom;Minjoong Kim;SeKwon 0h;EunAe Cho;HyukSang Kwon .Design of ternary Al—Sn—Fe alloy for fast on-board hydrogen production, and its application to PEM fuel cell[J].International journal of hydrogen energy,2011(18):11825-11831. |
| [22] | Chen G .Removal method for removing grease and oxide coating on surface of aluminum alloy sheets involves eroding grease and oxide coating with alkali and warm and cold water to remove stains after being dried:[P].CN,101705494-A,2010-05-12. |
| [23] | 陈俊娟.催化裂化催化剂中氧化铝含量测定方法的改进[J].河北化工,2008(08):77-78. |
| [24] | 孙焱,王海舟.不同状态铝的酸分解行为研究[J].冶金分析,2002(05):15-16. |
| [25] | Pembe Erdogan;Behiye Yuksel;Yucel Birol .Effect of chemical etching on the morphology of anodic aluminum oxides in the two-step anodization process[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2012(10):4544-4550. |
| [26] | J.H.Yuan;F.Y.He;D.C.Sun;X.H.Xia .A Simple Method for Preparation of Through-Hole Porous Anodic Alumina Membrane[J].Chemistry of Materials,2004(10):1841-1844. |
| [27] | Wang YL;Tseng WT;Chang SC .Chemical-mechanical polish of aluminum alloy thin films: slurry chemistries and polish mechanisms[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2005(1/2):36-43. |
| [28] | 尹淑梅,张韵慧.无腐蚀、不溶性钎剂的新进展[J].焊接技术,2002(03):45-47. |
| [29] | XUE Song-bai,ZHANG Ling,HAN Zong-jie,HUANG Xiang.Reaction mechanism between oxide film on surface of Al-Li alloy and CsF-AlF3 flux[J].中国有色金属学会会刊（英文版）,2008(01):121-125. |
| [30] | 薛松柏,陈文华,吕晓春,钱乙余.LY12铝合金氧化膜与钎剂的反应机制[J].中国有色金属学报,2004(04):543-547. |
| [31] | 俞伟元,路文江,刘贇.AIF3-KF-KBr钎剂去膜机理研究[J].兰州理工大学学报,2012(01):9-11. |
| [32] | 徐维普,吴毅雄,刘秀忠.锌铝合金软钎剂的研究及分析[J].表面技术,2004(01):61-62,75. |
| [33] | 六二一研究所.铝合金无钎剂钎焊[J].航空工艺技术,1977(01):28-31. |
| [34] | 蔡怀福 .镍基及铁基合金真空钎焊时氧化膜去除及钎料铺展[J].焊接学报,1985,6(01):39-45. |
| [35] | 曾凌三.铝阳极氧化膜的剥离与剥离膜的性质[J].电镀与精饰,1997(02):24. |
| [36] | 安成强,崔作兴,袁艳.铝阳极氧化厚膜的制备工艺研究[J].表面技术,2002(01):30-31,39. |
| [37] | 姚素薇,莫敏,韩玉鑫,张璐,张卫国.铝阳极氧化法制备Al2O3纳米线[J].电镀与涂饰,2005(04):1-3. |
| [38] | 高禄梅,王胖胖,吴小清,宋晓平.通孔氧化铝模板的强脉冲电化学剥离研究[J].无机材料学报,2005(06):1417-1422. |
| [39] | Tian ML;Xu SY;Wang JG;Kumar N;Wertz E;Li Q;Campbell PM;Chan MHW;Mallouk TE .Penetrating the oxide barrier in situ and separating freestanding porous anodic alumina films in one step[J].Nano letters,2005(4):697-703. |
| [40] | Margadant N;Skeldon P;Textor M et al.Gallium enrichment and film detachment during anodizing of an Al-Ga alloy[J].Corrosion Science,2000,42(03):405-419. |
| [41] | 邱竹贤.纪念霍尔埃鲁法发明一百年-兼论其改进的可能性[J].轻金属,1986(09):24-27. |
| [42] | Bruno M J.Aluminum carbothermic technology comparison to Hall-Heroult process[A].SAN DIEGO:CA,2003:395-400. |
| [43] | 谢宏伟,王锦霞,翟玉春,廖先杰,李来时,李承德,陈堂平.低温熔盐铝电解的研究进展[J].材料导报,2009(17):13-18. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%