高硅铸铝合金材料机械强度高,易成型,价格低廉,在工业许多领域广泛使用.但由于铸造铝合金耐蚀性差等原因,限制了其使用范围.综述了提高铸造铝合金耐蚀性的主要方法,包括阳极氧化、化学镀、激光熔覆及等离子磁控溅射等,并对每种方法进行了简要的评述.
参考文献
| [1] | 黄伯云.有色金属材料工程(上)[M].北京:化学工业出版社,2006:140-141. |
| [2] | 刘定福.压铸铝合金件光亮导电膜化学氧化[J].电镀与环保,2004(01):33-34. |
| [3] | 彭靓,钱翰城.压铸铝合金表面化学转化膜技术[J].表面技术,2002(01):42-44. |
| [4] | 葛圣松,杨玉香,邵谦.铸铝表面无铬黑色转化膜的形貌及耐蚀性[J].腐蚀科学与防护技术,2006(03):228-230. |
| [5] | Knudseno;Tanemb S;Bjrgum A et al.Anodising as pretreatment before organic coating of extruded and cast aluminium alloys[J].Corrosion Science,2004,46(8):2081-2095. |
| [6] | 王平,魏晓伟.多孔型阳极氧化膜的形成机理[J].表面技术,2005(06):28-29,32. |
| [7] | 马骏,赵占西,苏冬云.铸铝合金硬质阳极氧化工艺分析及改进[J].表面技术,2006(06):30-31,34. |
| [8] | 阎永京.不同铝合金在硫酸液中硬质阳极氧化工艺的研究[J].腐蚀与防护,2006(09):463-465. |
| [9] | 周建军.铸造铝合金硬质阳极氧化工艺研究[J].材料保护,1998(09):15. |
| [10] | 刘忆,刘凤霞.工业纯铝硬质阳极氧化的工艺研究[J].表面技术,2006(06):35-36,47. |
| [11] | Song-jiang M A;Peng Luo;Hai-hui Zhou.Preparation of anodic films on 2024 aluminum alloy in boric acid-contaiping mixed electrolyte[J].Traps Nonferrous Met Soc China,2008(18):825-830. |
| [12] | 李珍芳.铸铝合金本色阳极氧化[C].第7届全国表面工程学术会议暨第二届表面工程青年学术论坛论文集,2008:154-156. |
| [13] | Sun Huanhuan;Wang Hui;Meng Fanling .Study of corrosion protection of the composite films on A356 aluminum alloy[J].Journal of Rare Earths,2011,29(10):991-996. |
| [14] | 顾琳,魏晓伟.ZL301铸造铝合金硬质阳极氧化工艺研究[J].表面技术,2008(03):55-57. |
| [15] | 张金涛,李春东,曹桂萍,胡吉明.铈盐和硅烷改性阳极氧化LY12铝合金的耐蚀性能[J].电镀与涂饰,2010(12):33-37. |
| [16] | 李杨,王立达,刘贵昌.铝基超疏水表面的制备及其耐蚀性[J].电镀与涂饰,2012(05):34-36. |
| [17] | T. Wei;F. Yan;J. Tian .Characterization and wear-and corrosion-resistance of microarc oxidation ceramic coatings on aluminum alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2005(1/2):169-176. |
| [18] | Lu L H;S D J;Zhanu J W et al.Evolution of micro-arc oxidation behaviors of the hot-dipping aluminum coatings on Q235 substrate steel[J].Surface and Coatings Technology,2011,257(9):41-44. |
| [19] | Wei C G;Guo H L;Huan C et al.Characterization of ceramic coatings produced by plasma electrolytic oxidation of aluminum al1 oy[J].Material Science and Engineering,2007,447(12):158-162. |
| [20] | GUO Qiao-qin,JIANG Bai-ling,LI Jian-ping,LI Gao-hong,XIA Feng.Corrosion resistance of micro-arc oxidized ceramic coating on cast hypereutectic alloy[J].中国有色金属学报（英文版）,2010(11):2204-2207. |
| [21] | 王平;郭晓阳;王春华 等.电流密度对ZL108铝合金微弧氧化膜性能的影响[J].稀有金属材料与工程,2012,41(增刊2):174-177. |
| [22] | 周海飞,DU Nan,赵晴.硫酸高铈在铸铝表面Ni-P-金刚石化学复合镀中的作用[J].稀土,2008(04):59-62. |
| [23] | 郭瑞光;李晓杰;唐长斌 等.铸铝表面绿色环保化学处理新工艺[J].表面技术,2009,36(5):50-52. |
| [24] | Yanlu Huang,Yongqiang Yang,Guoqiang Wei,Wenqing Shi,Yibin Li.Boundary coupled dual-equation numerical simulation on mass transfer in the Process of laser cladding[J].中国光学快报（英文版）,2008(05):356-360. |
| [25] | 汪震,刘其斌,肖明,杨邦成.Nd2O3含量对宽带激光熔覆生物活性稀土梯度涂层性能的影响[J].中国激光,2011(05):186-191. |
| [26] | M.-B. Park;S.-J. Hwang;N.-H. Cho .Effect of the grain size and chemical features on the phase transition and physical characteristics of nano-grained BaTiO_3 ceramics[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2003(1/3):155-158. |
| [27] | 曾涛,董显林,毛朝梁,梁瑞虹,杨洪.孔隙率及晶粒尺寸对多孔PZT陶瓷介电和压电性能的影响及机理研究[J].物理学报,2006(06):3073-3079. |
| [28] | 周陈菊,郑忠云,王少锋,曾红春,席珍强.铝合金表面激光熔覆高硅涂层的组织与磨损性能[J].浙江理工大学学报,2012(02):254-258. |
| [29] | 高雪松,田宗军,沈理达,刘志东,黄因慧.激光熔覆Al2O3-13％ TiO2陶瓷层制备及其抗热震性能[J].中国激光,2012(02):85-90. |
| [30] | 杨理京,孔凡志,姚建华.激光熔凝NiAl/纳米Al2O3化学复合镀层抗高温氧化性能[J].激光与光电子学进展,2013(01):164-168. |
| [31] | 杨志鸿,黄惠,祝星,郭忠诚.铝及铝合金表面直接电镀铅工艺[J].材料保护,2009(07):36-38. |
| [32] | Tillous, K;Toll-Duchanoy, T;Bauer-Grosse, E;Hericher, L;Geandier, G .Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74[J].Surface & Coatings Technology,2009(19):2969-2973. |
| [33] | Wen-tao Wang;Xin-ming Zhang;Zhi-guo Gao .Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(1/2):366-371. |
| [34] | 陈艳芳,吴继龙,关鹏娜,林亚威.搅拌速度对铝合金表面电镀Ni-SiC的影响[J].热加工工艺,2011(06):121-123. |
| [35] | Wang Deqing;Shi Ziyuan;Kou Tangshan.Composite plating of hard chromium on aluminum substrates[J].Surface&Coatings Technology,2005(191):324-329. |
| [36] | 李灿民,魏荣华.等离子增强磁控溅射沉积Ti（Al）基纳米复合涂层在铸铝模具上的应用[J].中国表面工程,2012(02):1-7. |
| [37] | 霍纯青,陈强,孙运金,岳蕾,张跃飞,刘福平.磁控溅射制备硅铝阻隔膜的研究[J].包装工程,2007(08):40-42. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%