热处理制度对0Cr13Ni8Mo2Al钢组织和性能的影响

1.北京航空材料研究院,北京,100095

2.北京航空材料研究院,北京,100095

3.北京航空材料研究院,北京,100095

4.北京航空材料研究院,北京,100095

5.北京航空材料研究院,北京,100095

Effect of Heat Treatment on Microstructure and Mechanical Properties of 0Cr13Ni8Mo2Al Steel

研究了热处理制度对0Cr13Ni8Mo2Al钢微观组织和性能的影响.结果表明,含有高密度位错的板条马氏体及与基体共格的细小弥散分布的β-NiAl沉淀析出是该钢具有高强度的主要原因.530℃左右时效强度达到峰值,510℃左右时效冲击韧性处于谷值.时效过程中合金的脆性与残余奥氏体的分解无关.

[1]	V Seetharaman;M Sundararaman R Krishnan .Precipitation Hardening in a PH13-8Mo Stainless Steel[J].Materials Science and Engineering,1981,47(01):1.
[2]	Luiz Henrique de Almeida;Sylvio Jose′G Magrani;Andre′Freitas;Ribeiroain LeMay.A Studay of Precipitation Hardening in PH13-8Mo Stainless Steel[J].Microstructure Science,1995:22.
[3]	V M Garrison;J A Brooks .The Thermal and MechanicalStability of Austenite in the Low Carbon Martensitic SteelPH13-8Mo[J].Materials Science and Engineering,1991,149:65.
[4]	R P Gaugh .Stress Corrosion Cracking of Precipition-HardeningStainless Steels[J].Materials Performance,1987,26(02):29.
[5]	A Kelly;R B Nicholson .[J].Progress in Materials Science,1963,10:313.
[6]	G A Chadwick.Metallography of Phase Transformation[M].Butterworths London,1972:208.

上一张下一张

计量

作者相关

文章评分