利用Gleeble3500热模拟试验机对Ti-10V-2Fe-3Al合金两种状态在不同变形温度及不同变形速率条件下的热变形行为进行了研究.结果表明,不同初始状态对合金的应力应变行为影响较大,经过固溶处理后在低于相变点变形时合金的流变应力比较高,但在高于相变点变形时流变应力没有明显差异;合金的应力指数与合金的状态和应变速率有关,大概以0.1 s-1为界分为低应变速率和高应变速率两部分;合金的表观激活能与材料的状态、变形温度及变形速率有关.当两种状态下的合金在温度为650～800C、应变速率为0.001～0.1s-1范围内变形时,β相内只发生动态回复,而α相除了发生动态回复外还可能发生动态再结晶;合金在相变点以上变形时只存在着单一的动态回复机制.
参考文献
| [1] | I Weiss .S L Semiatin[J].Materials Science and Engineering,1998,A243:46-65. |
| [2] | Vassel A;Uginet JF;Campagnac MH .Conference[J].Current Advances in Materials and Processes,1990,1:55-60. |
| [3] | G T Terlinde;T W Duerig;J C Williams .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1983,14A:2101-2115. |
| [4] | R R Boyer;G W Kuhlman .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1987,18A:2095-2103. |
| [5] | D g Robertson;H B McShane .[J].Materials Science and Technology,1997,13:575-583. |
| [6] | V. V. Balasubrahmanyam;Y. V. R. K. Prasad .Hot deformation mechanisms in metastable beta titanium alloy Ti-10V-2Fe-3Al[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2001(10):1222-1228. |
| [7] | Y. V. R. K. Prasad;T. Seshacharyulu .Modelling of hot deformation for microstructural control[J].International Materials Reviews,1998(6):243-258. |
| [8] | D. G. Robertson;H. B McShane .Analysis of high temperature flow stress of titanium alloys IMI 550 and Ti-10V-2Fe-3Al during isothermal forging[J].Materials Science and Technology: MST: A publication of the Institute of Metals,1998(4):339-345. |
| [9] | J F Murdock;T SLundy;E E Stansbury .[J].Acta Materialia,1964,12:1033. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%