欢迎登录材料期刊网

材料期刊网

高级检索

采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、差热分析(DTA)等方法研究了高能球磨及热处理对新型合金LaNi 5-41%Mg(质量分数)的组织形貌、结构变化及热稳定性能的影响.结果表明:经280r/min球磨250h后,LaNi 5-41%Mg样品由镧、镁和镍等非晶以及微量的晶体Mg和Mg2Ni组成;所得的粉末形状大多数为规则的近球形或球形,颗粒直径为0.1~15.2μm,其中87%的颗粒直径为0.1~2μm.球磨样品经763K保温35d后,得到热稳定性较好的由纳米Mg2NiLa,Mg2Ni,Mg17La2三相组成的合金,其平均晶粒直径为26.9nm.

参考文献

[1] Schmid J.;Sommer F. .Heat capacity of liquid La-Mg-Ni alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,1998(1/2):216-223.
[2] Kohno T.;Yoshida H. .Hydrogen storage properties of new ternary system alloys: La_2MgNi_9, La_5Mg_2Ni_(23), La_3MgNi_(14)[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2000(2):L5-L7.
[3] NAGAEH;TOMIZAWA H;OGASWARA T et al.HydridingcharacteristicsofMg-Xwt%LaNi5sinteredalloys[J].Journal of the Less-Common Metals,1990,157:15-19.
[4] SAIRAMANSS;DAVIDONKJ;SRIVASTAVAON .Onthesynthesis,characterizationandhydrogenationbehaviourofMgbasescompositematerialsMg-Xwt%CFMmNi5preparedthroughmechanicalalloying[J].Journal of Alloys and Compounds,1999,292:202-211.
[5] IMAMURAH;SAKASAI N;KAJII Y .HydrogenabsorptionofMg-basedcompositespreparedbymechanicalmilling[J].Journal of Alloys and Compounds,1996,232:218-223.
[6] ERLOUISLEA;CABRERA E;HALL-BARIENTOSSS E et al.AthermalanalysisinvestigationofthehydridingpropertiesofmamocrystallineMg-Nibasedalloyspreparedbyhighenergyballmilling[J].Journal of Alloys and Compounds,2000,305:82-89.
[7] GrossKJ;SPATZ P;ZUTTEL A et al.MechanicallymilledMgcompositesforhydrogenstorage-thetransitiontoasteadystatecomposition[J].Journal of Alloys and Compounds,1996,240:206-209.
[8] ADELLAOUOIM;CRACCO D;PERCHERON G A .StructurecharacterizationandreversiblehydrogenabsorptionpropertiesofMg2Nirichnanocompositematerialssynthesizedbymechanicalalloying[J].Journal of Alloys and Compounds,1998,268:233-240.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%