欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料工程
  4. 三维编织复合材料的力学性能研究现状

材料工程, 2004, (2): 44-48. doi: 10.3969/j.issn.1001-4381.2004.02.012

三维编织复合材料的力学性能研究现状

张美忠 1, , 李贺军 2, , 李克智 3,

1.西北工业大学超高温复合材料实验室,西安,710072

2.西北工业大学超高温复合材料实验室,西安,710072

3.西北工业大学超高温复合材料实验室,西安,710072

基金项目:   国家自然科学基金(50072019,50172039)  

关键词： 三维编织复合材料 , 建模 , 数值仿真 , 力学性能

Progressing in the Study on Mechanical Properties of the 3D Braided Composites

对近年来关于三维编织复合材料力学性能的研究方法和内容进行了综述.归纳出三类主要研究方法:实验研究、细观结构力学模型研究、数值仿真研究.实验研究集中于测试各种编织参数和载荷对其力学性能指标的影响.细观结构力学模型研究主要是通过三维编织体的拓扑结构建立力学分析模型,主要是"米"字枝状模型、纤维倾斜模型和3细胞模型.数值仿真研究是基于材料的线弹性力学,利用有限元分析法对其力学性能进行数值仿真.本工作对当前研究的关键问题进行了分析,就今后的研究工作发表了一些看法.

参考文献

[1] KO F K;WHITNEY J M,Ed.Tensile Strength and Modulus of a Three-dimensional Braid Composite,Composite Materials:Testing and Design(Seventh Conference).ASTM STP893[C].American Society for Testing and Materials,Philadelphia,1986:392-403.
[2] MACANDER A B;CRANE R M;CAMPONESCHI E T.Fabrication and Mechanical Properties of Multidimensionally (X-D) Braided Composite Materials.Composite Material:Testing and Design(Seventh Conference)[A].ASTM STP 893,WHITNEY J M,Ed.Amrican Society for Testing and Material,Philadelphia,1986:422-443.
[3] Kalidindi SR.;Abusafieh A. .LONGITUDINAL AND TRANSVERSE MODULI AND STRENGTHS OF LOW ANGLE 3-D BRAIDED COMPOSITES[J].Journal of Composite Materials,1996(8):885-905.
[4] Tang Z X;POSTLE R .Mechanics of Three-dimensional Braided Structures for Composite Materials-partⅠ: Fabric Structure and Fibre Volume Fraction[J].Computers and Structures,2000,49:451-459.
[5] Tang Z X;POSTLE R .Mechanics of Three-dimensional Braided Structures for Composite Materials-partⅡ:Prediction of the Elastic Moduli[J].Computers and Structures,2001,51:451-457.
[6] 唐国翌,闫允杰,陈锡花,卢子兴,陆萌,冯志海.多向编织碳纤维复合材料的断裂及微观形貌[J].清华大学学报（自然科学版）,1999(10):4-7.
[7] 刘谦,李嘉禄,李学明.三维编织工艺参数对复合材料拉伸性能的影响[J].宇航材料工艺,2000(01):55-58.
[8] 杨朝坤.编织结构复合材料力学性能的测试与分析[J].玻璃钢/复合材料,2002(03):11-14.
[9] 徐永东,成来飞,张立同.三维碳化硅/碳化硅陶瓷基编织体复合材料[J].无机材料学报,2001(02):344-348.
[10] 韩红梅 .C/C复合材料的力学性能及损伤演变研究[D].西安:西北工业大学,2002.
[11] Ishikawa T;CHOU TW .Stiffness and Strength Behavior of Woven Fabric Composites[J].Journal of Materials Science,1982,17:3211-3220.
[12] MA C L;YANG J M;CHOU T W.Elastic Stiffness of Three-Dimensional Braided Textile Structural Composites[A].American Society for Testing and Material,Philadelphia,1986:404-421.
[13] 庞宝君;杜善义;王铎 等.三维多向编织复合材料分析模型[J].哈尔滨工业大学学报,1996,28(06):1-6.
[14] Yang J M;MA C L;CHOU T W .Fiber Inclination Model of Three-dimensional Textile Structural Composites[J].Journal of Composite Materials,1986,20:472-484.
[15] Ishikawa T .Anti-Symmetric Elastic Properties of Composite Plates of Satin Weave Cloth[J].Fiber Science and Technology,1981,15:127-145.
[16] Ishikawa T;CHOU T W .One-Dimensional Micromechanical Analysis of Woven Fabric Composites[J].AIAA Journal,1983,21:1714-1721.
[17] Ishikawa T;CHOU T W .Stiffness and Strength Properties of Weaven Fabric Composites[J].Journal of Materials Science,1982,17:3211-3220.
[18] Ishikawa T;CHOU TW .In-plane Thermal Expansion and Themal Bending Coefficients of Fabric Composites[J].Journal of Composite Materials,1983,17:92-94.
[19] Ishikawa T;CHOU T W .Elastic Behavior of Woven Hybrid Fabric Composites[J].Journal of Materials Science,1982,16:2-19.
[20] Ishikawa T;CHOU T W .Thermoelastic Analysis of Hybrid Fabric Composites[J].Journal of Materials Science,1983,18:2260-2268.
[21] 孙慧玉,吴长春,卞恩荣.三维编织复合材料面内刚度和强度性能研究[J].复合材料学报,1998(04):102-106.
[22] Wu D L .Three-cell Model and 5D Braided Structural Composites[J].Composites Science and Technology,1996,56:225-253.
[23] Ping Tan;Liyong Tong;Grant P. Steven .Micromechanics models for the elastic constants and failure strengths of plain weave composites[J].Composite Structures,1999(1/4):797-804.
[24] Tan P;TONG L Y;STEVEN G P .Behavior of 3D Orthogonal Woven CFRP Composites.PartⅡ[J].FEA and Analytival Modeling Approachs Composite:Part A,2000,31:273-281.
[25] Tan P;TONG L;STEVEN G P .A Three-dimensional Modelling Technique for Predicting the Linear Elastic Property of Opened-packing Woven Fabric Unit Cells[J].Computers and Structures,1997(38):261-271.
[26] IVELIN I;ALA T .Three-dimensional Computational Micro-mechanical Model for Woven Fabric Composites[J].Computers and Structures,2001,54:489-496.
[27] Pandey R;HAHN H T .Visualization of Representative Volume Elements For Three-Dimensional Four-step Braided Composites[J].Composites Science and Technology,1996,56:161-170.
[28] 孙义林,黄小平,徐宁光,孙良新.三维编织结构的计算机图形显示[J].中国图象图形学报,2000(05):443-446.
[29] 李嘉禄,刘谦.三维编织复合材料中纤维束横截面形状的研究[J].复合材料学报,2001(02):9-13.
[30] 黄小平,孙良新,徐孝诚.复合材料三维四向矩形编织物角柱结构研究[J].复合材料学报,2001(04):11-16.
[31] L.Chen X.M.Tao C.L.Choy .Mechanical analysis of 3-D braided composites by the finite multiphase element method[J].Composites science and technology,1999(16):2383-2391.
[32] Tang Z X;POSTLE R .Mechanics of Three-dimensional Braided Structures for Composite Materials-partⅢ: Nonlinear Finite Element Deformation Analysis[J].Computers and Structures,2001,51:451-457.
[33] 刘振国,陆萌,麦汉超,卢子兴,冯志海.三维四向编织复合材料弹性模量数值预报[J].北京航空航天大学学报,2000(02):182-185.
[34] 刘振国,卢子兴,陆萌,麦汉超,冯志海.三维四向编织复合材料剪切性能的数值预报[J].复合材料学报,2000(02):66-69.
[35] 庞宝君,曾涛,杜善义.三维多向编织复合材料有效弹性模量的细观计算力学分析[J].计算力学学报,2001(02):231-234.
[36] 冯淼林,吴长春,孙慧玉.三维均匀化方法预测编织复合材料等效弹性模量[J].材料科学与工程,2001(03):34-37.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net