选用不同粒径大小的SiC颗粒,并通过对颗粒分布的有效控制,采用无压浸渗工艺制备了不同体积分数(15%～65%)的SiCp/Al复合材料,并在此基础上试制了梯度SiCp/Al复合材料.运用OM,XRD等手段对所制备的复合材料进行了显微组织观察与成分分析,并对选定体积分数的复合材料进行了密度以及力学测试.研究结果表明,无压浸渗工艺下不同体积分数的SiCp/Al复合材料组织均匀、致密,力学性能良好;具有梯度结构的SiCp/Al复合材料层间结合良好,没有层间剥离现象.
参考文献
| [1] | CLYNE T Y;WITHERS P J.An introduction to metal matrix composites[M].Cambridge:Cambridge University Press,1993 |
| [2] | 崔岩.碳化硅颗粒增强铝基复合材料的航空航天应用[J].材料工程,2002(06):3-6. |
| [3] | MARUYAMA BENJI;HUNT WARREN H.Discontinuously reinforced aluminium:current status and future direction[J].Journal of The Minerals,Metals & Materials Society,1999(11):59-61. |
| [4] | Z.P. Luo;Y.G. Song;S.Q. Zhang .A TEM study of the microstructure of SiC_p/Al composite prepared by pressureless infiltration method[J].Scripta materialia,2001(10):1183-1189. |
| [5] | PECH-CANUL M I;KATZ RN;MAKHLOUF M M .Optimum conditions for pressureless infiltration of SiCp preforms by aluminum alloys[J].Journal of Materials Processing Technology,2000,108:68-77. |
| [6] | Y. Sahin;M. Acilar .Production and properties of SiCp-reinforced aluminium alloy composites[J].Composites, Part A. Applied science and manufacturing,2003(8):709-718. |
| [7] | Zulfia A.;Hand RJ. .The production of Al-Mg alloy/SiC metal matrix composites by pressureless infiltration[J].Journal of Materials Science,2002(5):955-961. |
| [8] | CHO KYUNG-MOX;CHOI Ⅱ-DONG;PARK IKMIN.Thermal properties and fracture behavior of compositionally graded Al-SiCp composites[J].Materials Science Forum,2004:479-452,621-624. |
| [9] | LOGN KATHRYN .Spray deposition processing of Al/SiC MMC armor materials and Ta alloys for army applications[R].Washington:US Army Research Office,1998. |
| [10] | S. R. Skaggs .A BRIEF HISTORY OF CERAMIC ARMOR DEVELOPMENT[J].Ceramic Engineering and Science Proceedings,2003(3):337-349. |
| [11] | 崔岩 .SiCp/6061Al复合材料的制备及界面研究[D].哈尔滨工业大学,1997. |
| [12] | 蒋咏秋;陆逢开;顾志建.复合材料力学[M].西安:西安交通大学出版社,1990 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%