采用粉末注射成形方法制备了钛合金坯体,然后利用溶剂脱脂方法脱除坯体中可溶性粘结剂.在热脱脂速率为2.0℃/min、最高脱脂温度600℃、保温时间为1h和真空脱脂气氛条件下脱除坯体中剩余粘结剂,坯体中残余碳氧含量分别0.092%(质量分数)和0.28%,低于国外报道的PIM钛合金脱脂坯中残余碳氧含量.XRD结果表明,脱脂坯中只存在α相,没有TiC,Ti3Al,TiO和TiN等杂质相存在.N2气氛下脱脂,脱脂坯中残余碳含量较低,但氧含量较高.
参考文献
| [1] | EYLON D;NEWMAN J R;THONE J K.Titanium and titanium alloy casting[A].ASM International,1992:634-646. |
| [2] | KANEKO Y .Injection molding of Ti powder[J].Journal of the Japan Society of Powder and Powder Metallurgy,1988,35(07):74-78. |
| [3] | 罗国珍;周廉;邓炬 .钛在中国的研究进展[J].稀有金属材料与工程,1997,26(05):1-6. |
| [4] | WELSCH G;BUNK W .Deformation modes of the α-phase of Ti-6Al-4V as a function of oxygen concentration and aging temperature[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1982,13A:889-899. |
| [5] | GRAY G T;LUETJERING G;WILLIAMS J C .The Influence of oxygen on the structure,fracture,and fatigue crack propagation behavior of Ti-8.6 Pct Al[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1990,21A:95-105. |
| [6] | A.J. WAGONER JOHNSON;C.W. BULL;K.S. KUMAR .The Influence of Microstructure and Strain Rate on the Compressive Deformation Behavior of Ti-6Al-4V[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(2):295-306. |
| [7] | DONG-GEON LEE;SANGHO KIM;SUNGHAK LEE .Effects of Microstructural Morphology on Quasi-Static and Dynamic Deformation Behavior of Ti-6Al-4V Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2001(2):315-324. |
| [8] | GUO Shi-bo;QU Xuan-hui;HE Xin-bo .Mechanical properties and microstructure of Ti-6Al-4V compacts by metal injection molding[J].Transactions of Nonferrous Metals Society of China,2004(6):1055-1061. |
| [9] | Hideshi Miura;Takanori Masuda;Tadashi Ogasawara .High Performance Injection Molded Ti Compacts[J].粉体および粉末冶金,2002(9):825-828. |
| [10] | KIM Yongchan;KIM Nack J .Densification behavior of PlMed TiAl parts[J].Journal of the Japan Society of Powder and Powder Metallurgy,1999,46(08):882-886. |
| [11] | Junnjiro Takekawa;Noriaki Sakurai .Effect of the processing conditions on density, strength and microstructure of Ti-12Mo alloy fabricated by PIM process[J].粉体および粉末冶金,1999(8):877-881. |
| [12] | XU Yuan-bin;NOMURA Hiroyuki .Characteristics of metal injection processed Ti5Al2.5Fe alloy for implant materials[J].Journal of the Japan Society of Powder and Powder Metallurgy,2001,48(04):316-321. |
| [13] | Keiichi Maekawa;Mituharu Takita;Hiroyuki Nomura .Effect of MIM process conditions on microstructures and mechanical properties of Ti-6Al-4V compacts[J].粉体および粉末冶金,1999(10):1053-1057. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%