通过三点弯曲实验,并借助XRD,SEM断口形貌分析,研究了最终热处理温度对中间相沥青基碳/碳复合材料微观结构与力学性能的影响,并对其断裂机制进行了探讨.结果表明:随着最终热处理温度的升高,材料的石墨化度增大,层间距d002减小,微晶尺寸Lc增大;材料未经热处理时,纤维与基体间界面结合较强,抗弯强度较高,弯曲断口较为平整,具有脆性断裂特征;随着热处理温度的升高,基体收缩,纤维与基体间界面结合减弱,抗弯强度减小,弯曲断口纤维拔出较长,材料具有韧性断裂特征.
参考文献
| [1] | 李贺军.炭/炭复合材料[J].新型炭材料,2001(02):79-80. |
| [2] | SAVAGE G.Carbon-Carbon Composites[M].London:Chapman & Hal1,1993:31-35. |
| [3] | Morimoto T.;Kondo M.;Ueda T.;Ogura Y. .MULTILAYER COATING FOR CARBON-CARBON COMPOSITES[J].Carbon: An International Journal Sponsored by the American Carbon Society,1995(4):351-357. |
| [4] | Paul PP.;Schwab ST. .CARBON MATERIALS OBTAINED FROM ORGANOMETALLIC MODIFICATION OF PITCH AND ITS OXIDATION RESISTANCE PROPERTIES[J].Carbon: An International Journal Sponsored by the American Carbon Society,1996(1):89-95. |
| [5] | HESHMAT A .The effect of intermediate graphitization on the mechanical and fracture behavior of 2D C/C composites[J].Carbon,1993,31(07):1121-1129. |
| [6] | 李贺军 .一种超高压制备碳/碳复合材料的方法和装置[P].CN 95124935.5,1995-06-08. |
| [7] | 稻垣道夫;刘洪波.石墨化度的评价[J].炭素技术,1991(05):38-43. |
| [8] | 稻垣道夫;刘洪波.石墨化度的评价(续)[J].炭素技术,1991(06):19-24. |
| [9] | 李崇俊,马伯信,霍肖旭.炭/炭复合材料石墨化度的表征（Ⅰ）[J].新型炭材料,1999(01):19-25. |
| [10] | L.M. Manocha;A. Warrier;S. Manocha .Microstructure of carbon/carbon composites reinforced with pitch-based ribbon-shape carbon fibers[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(7):1425-1436. |
| [11] | Lee KJ.;Chen ZY. .Microstructure study of PAN-pitch-based carbon-carbon composite[J].Materials Chemistry and Physics,2003(2):428-434. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%