采用Gleeble-1500热模拟机在变形温度为750～1100℃、应变速率为0.01～1s-1范围内对TB8钛合金进行了单道次热压缩变形试验,研究了其高温变形力学行为.结果表明:随着变形温度的升高和应变速率的降低材料的峰值应力和稳态应力显著降低;高温变形条件下TB8合金流变应力本构关系可以用双曲正弦方程和Z参数描述;建立并初步分析了基于动态材料模型的TB8钛合金热加工图,当温度为950～1100℃、应变速率为0.01s-1时TB8合金的能量耗散效率较高.
参考文献
| [1] | Prasad Y V R K;Rao K P .Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300-950℃[J].Materials Science and Engineering,2005,391A:141-150. |
| [2] | Nho-Kwang Park;Jong-Taek Yeom;Young-Sang Na .Characterization of deformation stability in hot forging of conventional Ti-6Al-4V using processing maps[J].Journal of Materials Processing Technology,2002(0):540-545. |
| [3] | S. Ramanathan;R. Karthikeyan;G. Ganasen .Development of processing maps for 2124Al/SiC_p composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):321-325. |
| [4] | Sivakesavam O;Prasad Y V R K .Hot deformation behavior of as-cast Mg-2Zn-1Mn alloy in compression:a study with processing map[J].Materials Science and Engineering,2003,362A:18-124. |
| [5] | Balasubrahmanyam VV.;Prasad YVRK. .Deformation behaviour of beta titanium alloy Ti-10V-4.5Fe-1.5Al in hot upset forging[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):150-158. |
| [6] | 李淼泉,李晓丽,龙丽,许广兴,于浩,迟彩楼,温国华.TA15合金的热变形行为及加工图[J].稀有金属材料与工程,2006(09):1354-1358. |
| [7] | 周军,曾卫东,舒滢,周义刚.应用热加工图研究TC17合金片状组织球化规律[J].稀有金属材料与工程,2006(02):265-269. |
| [8] | 于冬梅.新型钛合金TB8的应用研究[J].飞机设计,2002(02):57-65. |
| [9] | 朱知寿,王庆如.TB8钛合金板材冷成形工艺及其应用研究[J].金属学报,2002(z1):414-416. |
| [10] | P. Vo;M. Jahazi;S. Yue;P. Bocher .Flow stress prediction during hot working of near-α titanium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):99-110. |
| [11] | 曾卫东,周义刚,周军,俞汉清,张学敏,徐斌.加工图理论研究进展[J].稀有金属材料与工程,2006(05):673-677. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%