采用基于溶质扩散控制模型结合CA方法对Ti-45Al合金定向凝固过程中温度梯度对显微组织演化影响进行了数值模拟.模拟结果表明,随着温度梯度增加,凝固形态经历了树枝晶→胞/枝混合结构→粗胞晶→细胞晶→超细胞晶的转变,而一次胞/枝晶臂间距随着凝固组织变化不断减小.此外,温度梯度很高时,固液界面处溶质富集程度很小,界面处出现溶质截流.
参考文献
| [1] | Joaquim Barbosa;C. Silva Ribeiro;A. Caetano Monteiro .Influence of superheating on casting of gamma-TiAl[J].Intermetallics,2007(7):945-955. |
| [2] | R.M. Imayev;V.M. Imayev;M. Oehring .Alloy design concepts for refined gamma titanium aluminide based alloys[J].Intermetallics,2007(4):451-460. |
| [3] | GANDIN CH-A;RAPPAZ M .Probabilistic modeling of micro-structure formation in solidification processes[J].ACTA METALLURGICA ET MATERIALIA,1993,41:345-360. |
| [4] | NASTAC L .Numerical modeling of solidification morphologies and segregation patterns in cast dendritic altoys[J].Acta Materialia,1999,47:4253-4362. |
| [5] | LIU L;HUANG T W;ZHANG J et al.Microstructure and stress rupture properties of single crystal superalloy CMSX-2 un-der high thermal gradient directional solidification[J].Materials Letters,2007,61:227-230. |
| [6] | LIU WEIPING;DUPONT J N .Effects of substrate crystallo-graphic orientations on crystal growth and microstructure devel-opment in laser surface-melted superalloy single crystals.Mathe-matical modeling of single-crystal growth in a melt pool (Part Ⅱ)[J].ACTA MATERIALIA,2005,53:1545-1558. |
| [7] | 王狂飞,李邦盛,米国发,郭景杰,傅恒志.Ti44Al合金胞/枝晶转变及其生长过程的数值模拟[J].金属学报,2007(02):211-216. |
| [8] | LAZARO BELTRAN-SANCHEZ;DORU M. STEFANESCU .Growth of Solutal Dendrites: A Cellular Automaton Model and Its Quantitative Capabilities[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2003(2):367-382. |
| [9] | 李强,李殿中,钱百年.枝晶凝固过程中的溶质浓度分布模拟[J].金属学报,2004(11):1215-1220. |
| [10] | Boettinger WJ.;Warren JA. .Simulation of the cell to plane front transition during directional solidification at high velocity[J].Journal of Crystal Growth,1999(3/4):583-591. |
| [11] | WAGNER A;SHOLLOCK B A;MCLEAN M .Grain structure development in directional solidification of nickel-base superal-loys[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,374:270-279. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%