在Cu基表面电镀Ni层上采用料浆包渗法渗铝,研究了800℃下,保温时间对渗层的成分、组织、厚度、显微硬度和Al原子扩散系数的影响.研究表明:Ni镀层表面经过活性渗铝后,形成了单相Ni2Al3金属间化合物渗层.随着保温时间的延长,Ni2Al3相中的Ni元素含量增加,Al元素的含量减少,同时,Ni2Al3相晶粒长大,渗铝层增厚,Al原子在渗铝层中的扩散系数下降,渗层显微硬度先降低后增高.
参考文献
[1] | Bateni MR.;Ashrafizadeh F.;Szpunar JA.;Drew RAL.;Mirdamadi S. .Oxidation behaviour of titanium coated copper substrate[J].Surface & Coatings Technology,2001(2/3):192-199. |
[2] | 任虎平,杨贵荣,宋文明,郝远,马颖,阎峰云.铜及铜合金表面改性技术的研究进展[J].铸造,2005(03):213-216. |
[3] | Kang HK .Microstructure and electrical conductivity of high volume Al2O3-reinforced copper matrix composites produced by plasma spray[J].Surface & Coatings Technology,2005(2/3):448-452. |
[4] | Gui-rong Yang;Wen-ming Song;Jin-jun Lu;Yuan Hao;Ya-min Li;Ying Ma .Microstructure of surface composite Al_2O_3/Ni on copper substrate produced by vacuum infiltration casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):223-228. |
[5] | C. Subramanian;G. Cavallaro;G. Winkelman .Wear maps for titanium nitride coatings deposited on copper and brass with electroless nickel interlayers[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(2):228-233. |
[6] | 甘正浩;毛志远;沈复初 等.铜的气体表面渗硅新工艺研究[J].材料科学与工程,1996,14(04):38-42. |
[7] | 甘正浩;毛志远;沈复初 等.铜的表面含硅渗层的结构与性能[J].材料科学与工程,1997,15(01):50-53. |
[8] | 孙远敬,岳立新,张雅玲.纯铜多元共渗及热处理工艺研究[J].煤矿机械,2006(06):1021-1022. |
[9] | 石子源;王学芝;王德庆 .纯铜Al2O3表面弥散强化的研究[J].金属热处理学报,1997,18(04):32-36. |
[10] | 张毅,田保红,陈小红,高颖颖,刘平,李炎.纯铜稀土催渗渗铝及其内氧化[J].铸造技术,2006(03):255-257. |
[11] | M. R. Bateni;F. Ashrafizadeh;J. A. Szpunar;R. A. L. Drew .Improving the tribological behavior of copper through novel Ti-Cu intermetallic coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2002(5/6):626-639. |
[12] | 张跃飞,陈飞,苏永安,潘俊德,徐重.纯铜加弧辉光离子渗钛的研究[J].金属热处理,2002(04):27-28. |
[13] | 袁庆龙,张跃飞,苏永安,池成忠,唐宾,徐重.纯铜等离子渗钛层的高温氧化[J].中国腐蚀与防护学报,2005(02):102-105. |
[14] | C. Zanotti;P. Giuliani;F. Maglia .Combustion synthesis of Co-Al and Ni-Al systems under reduced gravity[J].Intermetallics,2006(2):213-219. |
[15] | 卢燕平;于福州.渗镀[M].北京:机械工业出版社,1985:32-33. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%