通过两种有限元模型的对比,提出了符合实际的X-cor夹层结构压缩模量有限元计算模型,利用大型有限元软件ANSYS对其压缩模量进行了数值计算,得到了X-cor夹层结构的应力场和压缩模量.研究了Z-pin半径、密度、植入角度和体积分数的改变对模型压缩模量的影响.结果表明:X-cor夹层结构压缩模量随Z-pin植入角度增加而减小,随Z-pin半径、密度和体积分数增加而增加,且与Z-pin体积分数呈线性关系,改变Z-pin半径与改变Z-pin密度对X-cor夹层结构压缩模量影响是等效的.通过有限元模型的计算,得到了X-cor夹层结构参数对其压缩模量的影响规律,验证了所提有限元模型的合理性.
参考文献
| [1] | CARSTENSEN T;COURNOYER D;KUNKEL E.X-corTM advanced sandwich core material X-cor advanced sandwich core material[A].Seattle:SAMPE,2001:452-466. |
| [2] | Andrea I. Marasco;Denis D.R. Cartie;Ivana K. Partridge .Mechanical properties balance in novel Z-pinned sandwich panels: Out-of-plane properties[J].Composites, Part A. Applied science and manufacturing,2006(2):295-302. |
| [3] | Denis D. Cartie;Norman A. Fleck .The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels[J].Composites science and technology,2003(16):2401-2409. |
| [4] | VAIDYA U K;MAHFUZ H;JEELANI S .Damage tolerance of resin transfer molded composite sandwich constructions[AFRL-VA-WP-TR-1999-3053][R].USA,Ohio:Tuskegee University Center for Advanced Materials,1999. |
| [5] | U.K. Vaidya;M.V. Kamath .Low-Velocity impact response of cross-ply laminated sandwich composites with hollow and foam-filled Z-pin reinforced core[J].Journal of Composites Technology & Research,1999(2):84-97. |
| [6] | VAIDYA U K;KAMATH M V;HOSUR M V.Low velocity and compression-after-impact response of pin-reinforced sandwich composites[A].Tennessee:Nashville,ASME,1999:1-10. |
| [7] | U. K. Vaidya;A. N. Palazotto .Low Velocity Impact and Compression-After-Impact Response of Z-Pin Reinforced Core Sandwich Composites[J].Journal of engineering materials and technology,2000(4):434-442. |
| [8] | VAIDYA U K;KUMAR P;HOSUR M V.Low velocity and high strain rate impact of pin reinforced foam core sandwich composite[A].San Antonio:SAMPE,1998:96-104. |
| [9] | VAIDYA U K;NELSON S;SINN B et al.Processing and high strain rate impact response of multi-functional sandwich composites[J].Computers & Structures,2001,52(03):429-440. |
| [10] | 田旭,肖军,李勇.X-cor夹层结构试制与性能研究[J].飞机设计,2004(01):22-25. |
| [11] | 杜龙,矫桂琼,黄涛.X状Z向碳pin增强泡沫夹层结构剪切刚度预报[J].固体力学学报,2007(04):369-374. |
| [12] | 杜龙,矫桂琼,黄涛,赵龙,黄峰.X状Z-pin增强泡沫夹层结构的剪切性能[J].复合材料学报,2007(06):140-146. |
| [13] | 杜龙 .X-cor夹层复合材料力学性能研究[D].西北工业大学,2007. |
| [14] | 杜龙,矫桂琼,黄涛.Z-pin增强泡沫夹层结构面压缩性能研究[J].航空材料学报,2008(04):101-106. |
| [15] | 郝继军,张佐光,张蕾,李敏,孙志杰.Z-pin植入参数对X-Cor夹层复合材料力学性能的影响[J].航空学报,2008(03):763-768. |
| [16] | 郝继军,张佐光,李敏,孙志杰.X-cor夹层复合材料平压性能分析[J].航空学报,2008(04):1079-1083. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%