通过分析试件应力分布的均匀性,对裂纹柔度法和层削法测试结果的有效性进行了评价.结果表明:深层应力测试方法能有效描述应力分布均匀的试件内应力的真实分布;对于应力分布均匀性差的试件,测试结果反映的是综合应力,不能有效描述内应力的真实分布,内应力分布的准确描述需要结合有限元仿真、表面测试和深层应力测试进行综合评价.
The validity of both crack compliance method and layer removal method measurement results was evaluated by analyzing the stress distribution uniformity of the test coupons. The results show that the two methods can describe the real stress distribution effectively for test coupon with mean stress distribution; while for test coupon with unmean stress distribution, the measurement results are synthetic stresses, and can not describe a real stress distribution. In order to describe the real residual stress distribution of test coupon accurately, it is necessary to combine the use of FEM, surface stress measurement and deep floor stress measurement, and to give an integrate evaluation.
参考文献
| [1] | 王秋成,柯映林,章巧芳.7075铝合金板材残余应力深度梯度的评估[J].航空学报,2003(04):336-338. |
| [2] | Michael B. Prime;Michael R. Hill .Residual stress, stress relief, and inhomogeneity in aluminum plate[J].Scripta materialia,2002(1):77-82. |
| [3] | 王树宏,左敦稳,润长生,王珉,徐礼林.LY12,В95п.ч和7050铝合金预拉伸厚板内部残余应力分布特征评估与分析[J].材料工程,2004(10):32-35. |
| [4] | 米谷茂.残余应力的产生和对策[M].北京:机械工业出版社,1983:60-67. |
| [5] | 姚灿阳 .7050铝合金厚板淬火温度场及内应力场的数值模拟研究[D].中南大学,2007. |
| [6] | 廖凯,WU Yun-xin,吴运新,张园园.铝合金厚板淬火表面换热系数的离散解析求法[J].材料热处理学报,2009(01):192-196. |
| [7] | 胡少虬,曾苏民.无相变合金淬火热应力演变机理的理论模型--（1）角端和边缘淬火热应力模型与淬火角端效应[J].稀有金属材料与工程,2006(04):538-541. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%